PDA

View Full Version : Megane Immo Off


Safety
11th January, 2013, 09:58 AM
hi friends

I need any info immo OFF. car is 1999 Megane diesel 028 906 021 DK bosch 0281 001 484 chip 24c02. I m upload original dump.

how is make immo off.

regards

Safety
immokill
11th January, 2013, 10:32 AM
Write in lines 30 40 50 all FF FF ,
use 24c02 with WP and lift leg 7 and put it on leg 8.
Cut immo line.
Safety
11th January, 2013, 10:55 AM
nice info many thanks, whice pin immo line?.
immokill
11th January, 2013, 11:56 AM
I think pin 59 on ecu is immo line. Green wire .
Safety
12th January, 2013, 11:09 AM
car is start ok. Now maximum 3000 rpm. what is problem?
cinici
12th January, 2013, 11:25 AM
You have deleted the program are what a lot of the wrong brother
rocodou
12th January, 2013, 11:31 AM
Unplug the old eprom 24c02
The first, on
24C04 eprom must be strong after the
Download software and epromun 7 Remove leg
and epromun 7 and 8 leg
Join solder

bad english sorry :(
tested 100% working

good luck
Safety
12th January, 2013, 11:37 AM
Unplug the old eprom 24c02
The first, on
24C04 eprom must be strong after the
Download software and epromun 7 Remove leg
and epromun 7 and 8 leg
Join solder

bad english sorry :(
tested 100% working

good luck


I try now this dump and I will report. maybe use immo emulator?
fear_dark
12th January, 2013, 11:39 AM
test and report
rocodou
12th January, 2013, 11:41 AM
I have run this many times before, and cast car and 100% working
I do not think that the required emulator

24c04 eprom change, and instead of just need to insert the
Download and run the bingo car, then dump I sent you :))
Shmortz
12th January, 2013, 02:32 PM
As I sad a 10000 times here in DK, the best solution is to make virgin and put emulator, removing eeprom, making WP and/or changing eeprom are not good solutions at all !!! With write protected eeprom ECU will not be able to store DTC's !
...and filling with FF's in not in so many adresses!
PaulHL
25th March, 2013, 07:09 PM
Hi together,

I have the same Problem,
the ECU is a Bosch 0 281 001 969, its from a Renault Megane 1, 1.9 dTI Bj.1999.

No the Immo is on and the Car doesn't start.

Eprom Type is 24c02

I want (need) a Solution for Imm off (for every time).

If I become a Solution for Immo off, then I think i have to use a Emulator, or ?

Eprom read and write is no Problem.

Regards

Paul
alle bmw
25th May, 2013, 12:26 PM
Shmortz (http://www.digital-kaos.co.uk/forums/members/146462-shmortz/)

MASE PLEASE EXPLAIN THIS FEAR
pierre renault
25th May, 2013, 01:44 PM
operates at 100%
replace the eprom 24C02 by 24C08 !!
Copy this file