PDA

View Full Version : Ford transit connect 1,8tdci 2005 delphy problem read ecu



sunduk112
12th January, 2013, 04:13 PM
Hi mats doday i try read this car with galleto2 but when i get 100% whene i read soft ware give me error and flash not save!
how i can read and write this ecu without risk.
Thank you.
Br.Babos

Mulatre
5th February, 2013, 04:33 PM
Hi! Did you read it by obdII or in boot mode? What model of ECU do you have? It can be found on ECU lable.

Babos
5th February, 2013, 06:19 PM
me to have problem with read this ecu not save flash

sunduk112
5th February, 2013, 06:21 PM
hi ecu is delphy i try read to obd2
ecu and ID i see but when i read i have error
i asking other tuners where is problem and i have report bad conect to obd2 or need do this job to table.
Soon i test this metodic and after report back.

budG60
3rd March, 2013, 09:13 PM
I have tried it on the bench etc, but it does not work.
You will need Ford powergate for this ecu. At this moment I have not found another tool which can flash this Ford ecu.


extra info:
PIN13 - Programming voltage 18V during programming or reading in security mode
PIN15 - SCP -
PIN16 - SCP +

PIN97 +12V
PIN8 +12V ignition
PIN55 +12V Keep alive power
PIN76 PIN77 PIN 103 - Ground