PDA

View Full Version : MPPS clone



rachmach
14th January, 2013, 03:27 PM
hello
i want to buy mpps but i need to know if it's clone or no
please help me

NASTASE
14th January, 2013, 04:01 PM
Original tool cost 1600 USD,made by AMT Cartech.
Clone tool cost around 60 USD,made by ?????
By the way, clone tool is not so bad.

moky
14th January, 2013, 04:40 PM
you can buy euro clone V16,work 100% fine

rachmach
14th January, 2013, 10:09 PM
ok tankh's for you
what is the best V12 or V16 ??

kire106ka
15th January, 2013, 12:30 AM
Depend what you whant to do with it
V12 it's fine and stable for older ecu

rachmach
15th January, 2013, 12:51 AM
tankh's friend

jeffbih
28th January, 2013, 09:46 AM
Hi ppl, I wount to buy a tool to read/write edc15,edc16,edc17 I need this for clear dpf and egr.
Can someone recommende good and reliable tool to do this?
Except AMT Cartech for now ;)

Could you share the opinion of mpps clone and which is stable version?

you can buy euro clone V16,work 100% fine
Where to get ?
I need advice and I appreciate your opinions.If you can detach some of time I'd be grateful.

Best regards

jeff

enigmauk
28th January, 2013, 11:29 AM
v12 and v16 both stable

galletto mini?

rachmach
29th January, 2013, 12:00 AM
what about mpps v13,01 clone ??

mrnobodyandso
29th January, 2013, 12:47 AM
mpps 13 i china fake not stable, buy v12 its cheap and stable like first and v3 version

Bosses
29th January, 2013, 07:29 PM
As above, mpps 13 is fake,it?s v12.
Go for older versions,XP stabil,win7 working as admin.

paskizo
29th January, 2013, 07:39 PM
Hi Friends.
i have a v12 euro clone, and work fine.
I test it in newest bmw, and many vag cars and the result is the same. 100% work fine, but is EURO clon remember, no CHINESE clon.

jeffbih
29th January, 2013, 08:05 PM
where can I get euro clon?

Regards...

Blackpower
29th January, 2013, 11:54 PM
Someone test mpps v16 on bmw me 9.2 ecus?

rachmach
11th February, 2013, 05:38 PM
hello
what aboute fgtech galletto 2 master ?? and mpps ..what the best ??

parik
11th February, 2013, 10:09 PM
where ti buy v16 clone?

antonypaul
11th February, 2013, 10:17 PM
euro clone works good in all type of Ecus or have any list that cover only some models ? i need more info about it Thanks

soundnavigator
12th February, 2013, 04:46 PM
This is carlist.

Best regards.

rachmach
12th February, 2013, 08:22 PM
with the best fgtech clone or mpps v12 clone ??

llopes
13th February, 2013, 06:47 PM
FGTECH clone has a lot more vehicles... since edc15 to edc17, siemens, etc.

Its more expensive thought

666_devil
13th February, 2013, 07:51 PM
I have china mpps 13.02 I know it is v12, it works great never had a problem, dont remeber where I bought it from, It does not work on some opel hibridas.

I have Galletto 2 too, it works great to it has more cars than mpps, and I believe that it is better tool than MPPS.

There were some cars that both of them could not maybe ecu safe tuning copy lock, but it some of them I did by BDM.

I never did EDC17 writing, FG reads whit out problem, I will buy one ECU from scrap yard to try it before I try on the car from clients.

kire106ka
13th February, 2013, 11:17 PM
You should biy more tools then one every tool works with diferent ecu you are not biying ori tool so don't expect one tool to do it all you need programer too these never ends there is always some new tool so go for it one by one

rachmach
15th February, 2013, 01:05 AM
i biy a mpps v12 and it work great but it display a message ( this software must be updated after 128 runs .)

666_devil
15th February, 2013, 06:53 PM
Normally if it is good clone it is gonna stay that way forever, because every time you start the program it resets the counter inside interface.

zzila
15th February, 2013, 07:18 PM
hallo, which clone tool is recommended to use on BMW
cars ?
thanks

kire106ka
15th February, 2013, 11:03 PM
Mine is locked to 128 and stays there so you will see with you'r interface

2xded
11th April, 2013, 06:08 PM
Can clone MPPS V5.0 read and write EDC17 on VW Tiguan 2.0 TDI CBAB, as stated in carlistl? Or only original?
Regards.

heteromies
11th April, 2013, 06:59 PM
This is carlist.

Best regards.

Thanks! Do you have also list for checksum correction support?

Avf130
11th April, 2013, 09:56 PM
How to understand if it is an euro clone or Chinese clone ?

kire106ka
12th April, 2013, 09:50 PM
If you biy v12 does no metter chinese works good

OVERSPEED
12th April, 2013, 10:12 PM
more or less... I have 2 Chinese MPPS V12, one didn?t work in CAN Line, other ID at least ! lol !

Avf130
12th April, 2013, 11:42 PM
If you biy v12 does no metter chinese works good

Like this one for example MPPS V12 0 0 6 K Can OBD Flasher for Remap Chiptuning V12 | eBay (http://www.ebay.com/itm/MPPS-V12-0-0-6-K-CAN-OBD-Flasher-for-Remap-Chiptuning-V12-/170998786586?pt=LH_DefaultDomain_0&hash=item27d0526a1a)

OVERSPEED
13th April, 2013, 12:45 AM
This translucid version looks like exactly as my "don?t work Can-line" one lol !!!

Avf130
13th April, 2013, 12:51 AM
This translucid version looks like exactly as my "don?t work Can-line" one lol !!!

LOL i just want to use it at my 2001 TDI Passat EDC15