Renault megane seruis32 immo

[roman_auto]

Hi all
i have here renault megane 2001 need to immo off,now my adapter to read flash gone, some one here done it with Galletto1260 or Renault decoder ? (this tools i have)

I tryied once to do it with the Decoder on Advance1 and no success.

need your help this case is urgent

btw : after disconnect battery the red flash stop working,the problem is in the bsi i think flash gone , if is any way to fix bsi is better (i have upa-usb too)



Thanks in advance

[roman_auto]

no one ? any ideas ?

[Shmortz]

with renault decoder you can only make it virgin, then need to put emulator, a colege of mine tryed to read with galetto and no success, I'll try to read the next sirius32 using galetto and boot mode...

if you can't red flash, cut immo line, switch igniton on once and then disconnect and make virgin with decoder, then make emulator with attiny2313 , connect it to immo line and it's done, schematic and dump for emulator you can find in DK..

Good luck!

[roman_auto]

hi
i disconnect the ecu,i decode iy with the decoder , cut immo 58
and put the emulator (i buy from ebay link below) and no start , tryied 3 times with no success.

http://www.ebay.com/itm/Renault-IMMO-ECU-Decoder-Repair-Immobiliser-Immo-Killer-1-x-Immo-Emulator-/270971749851?pt=Motors_Automotive_Tools&hash=item3f172cc5db&vxp=mtr

can you give me a good tested immo off file for 2001,1600cc,16V tommrow i will get my adapter .

[batpepi]

you can find here in forum working off file.you can make virgin -4000 to 8000 adress put all FFFF,put emulator and cut 58pin.

[Shmortz]

find a way to read flash, I'll do it off for you