PDA

View Full Version : VW POLO 2002 NEED PIN CODE


achaccha
15th January, 2013, 05:15 PM
Hi guys, I need your help to find the pin code of this ECU Magneti Marelli.
036 906 034 FL
IAW4MV.FL
EPROM 95080
emanuel2010
15th January, 2013, 06:06 PM
Wrong dump
DANEYSON
15th January, 2013, 06:12 PM
Senha so pelo painel se precisar tenho arquivo do painel e central casados.
tawaf11
15th January, 2013, 06:17 PM
your pin 02049
achaccha
16th January, 2013, 03:12 PM
your pin 02049

Hello friends, this vehicle has stopped working from one moment to another, if you say that the pin of the ecu is 02049, possibly something happened with this file. I say this because I read the eprom 93c86 dashboard and in this file shows pin Tango 01660. anyone can help to match or synchronize the ecu with the dashboard?
Thanks for your help
keygargoil
17th January, 2013, 01:41 AM
i did a similar job replace the ecu and reprogramme the keys there is no pin in tyhis ecu it is immo 2 pin in cluster
achaccha
3rd March, 2013, 02:10 PM
Dear friends.
as I said this car has all its original components, but at any moment the engine was shut down and can not be turned back on. I entered with Avdi and the image can be seen "engine start permitted" NO. I try to do readings and engine ecu will not let me do it, I can only have the reading of the EPROM and flash on the instrument panel.
someone has an idea how to tackle this problem?
Thanks for your help
haroutioun
3rd March, 2013, 05:06 PM
Dear friends.
as I said this car has all its original components, but at any moment the engine was shut down and can not be turned back on. I entered with Avdi and the image can be seen "engine start permitted" NO. I try to do readings and engine ecu will not let me do it, I can only have the reading of the EPROM and flash on the instrument panel.
someone has an idea how to tackle this problem?
Thanks for your help
Hello,
write this file and give us the result.
yugo45
3rd March, 2013, 06:08 PM
i did a similar job replace the ecu and reprogramme the keys there is no pin in tyhis ecu it is immo 2 pin in cluster
This is MM4 and it is immo 3 so it has pin in ECU.


Dear friends.
as I said this car has all its original components, but at any moment the engine was shut down and can not be turned back on. I entered with Avdi and the image can be seen "engine start permitted" NO. I try to do readings and engine ecu will not let me do it, I can only have the reading of the EPROM and flash on the instrument panel.
someone has an idea how to tackle this problem?
Thanks for your help

I think your ECU is bad.
You file is not good and it look corrupted .

BTW VIN shows that car is 2003.
achaccha
5th March, 2013, 08:49 PM
Be possible for someone to give me a file for this ecu Immo Off?
Thanks for your help
scanvec
5th March, 2013, 10:30 PM
Hi your pin : 1660
scanvec
5th March, 2013, 10:33 PM
Immo3 login: 1660 km: 94641 vin: 9BWHF49A03P032095
achaccha
14th March, 2013, 03:05 AM
Hello,
write this file and give us the result.

Hello Friends.
I tested the file you sent Haroutioun, something incredible is what happened, I did not use the pin code and went defrente to adaptation channel 50 pin wrote "01660" and trailed off immobilizer icon on the dashboard. The engine started immediately.
Thanks for your help
yugo45
14th March, 2013, 05:48 AM
Hello Friends.
I tested the file you sent Haroutioun, something incredible is what happened, I did not use the pin code and went defrente to adaptation channel 50 pin wrote "01660" and trailed off immobilizer icon on the dashboard. The engine started immediately.
Thanks for your help
It is Virgin file , Any Virgin ECu or Cluster do not need pin , just go straight to adaptation and enter original pin.