PDA

View Full Version : fiesta 1.4 tdci 68cv sid206 map"s and factor"s



mexanico1971
15th January, 2013, 10:59 PM
hi there !
need some help in this !
car
fiesta 2009 1.4 tdci sid206 68cv

I was looking at the maps and can find proper factor"s for :
torque IQ/Nm
fuel map"s
boost
lambda

missing me map"s

rail limiter
boost limiter
boost X temperature
Injec X temperature !


if someone have made one of this please give a help !

I hope find more map"s and wend I have identified I put here!

ori file read width fgt2 2mb obd plug

thank"s in advance !

br

Fasters
17th January, 2013, 03:58 PM
You can use this software to find maps, thanks to jazd.

http://www.digital-kaos.co.uk/forums/f173/ppd-maps-siemens-ppd-map-detection-287921/

kennfeld
17th January, 2013, 05:33 PM
You can use this software to find maps, thanks to jazd.

http://www.digital-kaos.co.uk/forums/f173/ppd-maps-siemens-ppd-map-detection-287921/


i think that sw can do nothing as it's not ppd ...
it's sid it should only give some singles

kennfeld
17th January, 2013, 05:48 PM
use factors from other sid ecu's 803 206 etc
and also the one from ppd
ofsset may been diff?rent

kennfeld
17th January, 2013, 05:49 PM
rail and boost limiters are easy to find

2200
17th January, 2013, 06:13 PM
i think railpressure factor 0.0325520 if we have max. 1600bar $4DA2E 16x16
but i dont know if i am right!!

rail limiter?
maybe 8x8 map ? 4F48E 4F6B6 ? ?

mexanico1971
18th January, 2013, 01:18 AM
i think railpressure factor 0.0325520 if we have max. 1600bar $4DA2E 16x16
but i dont know if i am right!!

rail limiter?
maybe 8x8 map ? 4F48E 4F6B6 ? ?


you are rigth about that for rail pressure !

thank"s

kennfeld
18th January, 2013, 02:19 AM
you are rigth about that for rail pressure !

thank"s


yes it's one of the maps

but try to log the rail pressure
then you have the real factor


0,03051 that you should find in a2L files

mexanico1971
18th January, 2013, 06:34 PM
yes it's one of the maps

but try to log the rail pressure
then you have the real factor


0,03051 that you should find in a2L files

I do not have a2L files !

width time from msa I learn to find the maps by the look !

but for me this sid206 is new !
I have compare width another 803/A
mine winols is always falling !

mexanico1971
18th January, 2013, 06:36 PM
some factor"s of sid 803/A


hpa = factor 0.082918
kg/h = factor 0.015625
?C = factor 1 offset -50
ms = factor 0.001
mg/stroke = factor 0.004 offset -131.072
nm = factor 0.031250
rpm = factor 32 or factor 1 (depending where it's used)
volt = factor 0.004883
Lambda = factor 0.19
Degrees = factor -0.023438 (for SOI offset = 120)
mg = factor 0.004 (some times using offset -131)
pedal = factor 0.097654

BOI
crankshaft degrees: factor 0.023438 / offset -120
Axis
X: ms/s 0.004
Y: RPM

but it look do no feet in sid206

my thank"s to smartuning
I stoled this from is post !

kennfeld
18th January, 2013, 10:51 PM
some are from ppd ...

so sometime you just need to change the offset ...
when they not fit generaly the offset is diff?rent

mexanico1971
19th January, 2013, 04:11 PM
hi there !
I was try to mod some map"s but I think the editor have some bugs !
another thing
winols detect"s only a part of the map"s like 16X7 but I think some map"s are 16X16 correct ?!
like this one

and about the bug editor is this safe to flash ?!

kennfeld
19th January, 2013, 04:27 PM
i use winols 2.37 all my maps are ok

detected as siemens maps

mexanico1971
19th January, 2013, 04:43 PM
i use winols 2.37 all my maps are ok

detected as siemens maps


oohh !
I see !