Vito 639 Dash Problem

[3R1]

Hi guys
I have a really big problem. I tried to change Km on a Vito 2004 that was with chip 0L02M but i couldn't read the right value. Then I tried and tried with no results and then I gave up. After I put everything back and everything was ok exept Km
The old value was 267480 and now it displays 999999
I diagnose the immo and the value was 1677770
And now finally I could read the cip with ak500 and now I puted another Km dump and It seems ok
Km are ok but it keeps on the ABS and Airbag lamps
Then I put the original dump again and the lights switch off but km display 999999

Can you please take a look at this dump and put the Km to 162000

Thanks

[mercis]

1 can see 122968 km
writte odo what you want i writte this to eis

[3R1]

Sorry mate it was the wrong file :(

Here is the right one

Thanks

[3R1]

and checked it with this program but I don't know why it dosen't change the value

Anyway thanks a lot

[dave11674]

put your dash to desired miles/km mate
this dump is now edited to 0km and will take the km from the dash once they sync up

did a 2007 yesterday so this is fresh in my mind lol
had soooo many problems but got there in the end with my UPA

dave

[aposig]

writte thise in ezs ,and put bin from dash at forum ,and what a you need ..

[3R1]

will test guys and let you know

Thanks

[dave11674]

out of interest 3R1..

did you have to lift any legs up on the 908 to get a good read ?

i had to lift pins 2 and 3 of the micro to get it to read n auto-baud right

dave

[aposig]

put thise bin in ezs and dash bin at forum orighinal and what a you need ....km in dash ,i clear service historyy in dah ,then put modifity bin at dash,after conect battery ...

[3R1]

Thanks a lot guys everything worked ok
ABS lights gone off and SRS had to reset
Km came too the desired value only programed the cluster afrte i wrote the bin in EZS
DAVE i Read it with only 3 solders on the board and wrote it too the same way

So thank you a lot another time :)

[3R1]

Guys I need your opinion
Which is the best tool for programing Mercedes dashes example
E211, C203, 2004 and after

thanks