View Full Version : CAS3+ AND ECU ALIGNMENT
xgate
19th January, 2013, 09:33 PM
Hello,
i have problem matching/aligning BMW CAS3+ and MSV70 ecu.
Car is E90 with old ecu water damage, i bought used ecu and read the ISN code with bmwkeycoder.
i then match ISN code in CAS3+ with MSV70 ecu.
After this, i try to synchronize cas and ecu but it will not work.
this is always the normal procedure i use all the time with CAS2 and CAS3 and it works fine, but it seems CAS3+ works different.
My friend told me i need to write EWS4 SECRET KEY (16 bytes) into MSV70 ECU, but i have no idea how to do it.
i will appreciate your help.
thank you.
bearheroes
20th January, 2013, 09:40 AM
post your dumps
xgate
20th January, 2013, 12:58 PM
post your dumps
hi,
the tools i am using does not require no dumps to retrieve ISN codes.
I am using BMWKEYCODER and BMW ISN Editor from https://avtotools.com/index.php?categoryID=98
both tool can retrieve ISN CODES without dumps.
i only need the procedure to match the 16bytes EWS4 SECRET KEY to ECU or better still virgin ECU MSV70 if only
it is possible?
bearheroes
20th January, 2013, 03:01 PM
post the dump of your cas and i'll give you ews4 secret code.but it is 128 byte if i remember well.
xgate
20th January, 2013, 05:39 PM
post the dump of your cas and i'll give you ews4 secret code.but it is 128 byte if i remember well.
Hi bearheroes,
i have BMWKEYCODER, which is able to retrieve the 16bytes ews4 secret key.
My problem is how to write it into MSV70 ECU and synchronize it with CAS3+.
bearheroes
20th January, 2013, 06:24 PM
you can't.only the the opposite.
starprog
20th January, 2013, 07:21 PM
Hi bearheroes,
i have BMWKEYCODER, which is able to retrieve the 16bytes ews4 secret key.
My problem is how to write it into MSV70 ECU and synchronize it with CAS3+.
you can't write ews4 keys on ecu
please poste dumps for ecu and cas3+
xgate
20th January, 2013, 07:33 PM
you can't.only the the opposite.
please see the attached bmw keycoder photo of the ews4 secret key.
bearheroes
20th January, 2013, 07:35 PM
this is from the previous ecu. probably.
GIODIAGNOS
31st October, 2019, 03:39 AM
Hi, You can help me register 128bit ISN from MSV80 to EWS4.4 ? Or tell me ISN 128bit from the dump of EWS4.4 so that I registered it in MSV80.
DME MSV80 ISN : C0B88DF24D15766EBFB1244AC2F0713B
Thank you.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.