PDA

View Full Version : Is this diagram for BDM correct



astrofil
21st January, 2013, 03:58 AM
Im about to do reading with my Cloned BDM 100
This picture is showing completely different pin layout than Oryginal BDM 100 manual but its highly possible because I see 12V on pins 2, 9 and ground only on pin 5. Im kind of confused.

spawns3
21st January, 2013, 04:03 AM
That pinout is from clone , and yes is ok . If u gonna try to read bosch ecu u can use the BDM frame or soldering 5 wires in BDM port . Always give 12v on plug if u don't have sure about connections on BDM .

astrofil
21st January, 2013, 06:51 AM
Would You be able to provide full Layout on the clone BDM 100? I`m about to read the Siemens MS45.1 and looks like I will need one more signal "VFLSIO"

astrofil
22nd January, 2013, 04:11 AM
Which diagram is right for the siemens ?