PDA

View Full Version : Remove DPF Fiat Doblo 1.3 Multijet



Maskart
21st January, 2013, 01:30 PM
Hi! I need to remove DPF from this Fiat Doblo 1.3 Multijet file, can any of you guys help me?

Here is the ECU data:
Marelli 51805368 MJD 6F3.D1 HW03R 1.3 JTD DOBLO SDE 85CV 3454-D166

Thanks in advance!

Baddog84
21st January, 2013, 03:58 PM
test and report

beltronics
21st January, 2013, 04:54 PM
what interface does it use to read and to write?
thanks.

BrunoPT
21st January, 2013, 08:33 PM
what interface does it use to read and to write?
thanks.


Galletto 2 :)

wiseman
22nd January, 2013, 12:13 AM
80 mins to read 40 mins to write Obd

beltronics
22nd January, 2013, 12:17 AM
mpps or magpro 4.2 do not do it?

xanubysx
22nd January, 2013, 07:47 AM
MPPS , Magpro2 no work this ecu... i connect fgtech on table... pinout connect...and read and write normally...

beltronics
22nd January, 2013, 10:49 AM
you can say the pinout to me to tune in

kinetic
22nd January, 2013, 03:25 PM
Attached file is password protected. Cheers

xanubysx
29th January, 2013, 09:13 AM
you can say the pinout to me to tune in

Use fgtech manual.... look on picture marelli... read 30-40min , write to same...

furnata
3rd February, 2013, 06:36 PM
BDM 100 read this ECU in 2-3min and write too...... Why you need to wait 40-80min. Its easy to remove from car and open this ECU

spawns3
4th February, 2013, 12:05 AM
BDM 100 read this ECU in 2-3min and write too...... Why you need to wait 40-80min. Its easy to remove from car and open this ECU

One time i have 1 that don't read by BDM i have to do the job by OBD with Fgtech2.

furnata
4th February, 2013, 10:50 AM
One time i have 1 that don't read by BDM i have to do the job by OBD with Fgtech2.

Maybe because you had problem with BDM port - never fail me
BR

SasaZg
13th March, 2013, 08:40 AM
I have Fiat doblo 1,3 multijet and i need dpf off.I would preciate any kind of help. Thanks in advance

SasaZg
17th March, 2013, 05:44 PM
I have Fiat doblo 1,3 multijet and i need dpf off.I would preciate any kind of help. Thanks in advance

No one for help?