PDA

View Full Version : Modus / Clio UCH question



albertros
22nd January, 2013, 12:36 PM
Hi,
needed to swap a UCH on a Modus no problem just swap eeprom contents
( 95160 )

Didn't work, no immo light. So tried anothe, that didn't work either.

Anyone done this?

Is eeprom pared to micro?

JCAEMW1011L2
28117756-9
V12.10
0620KE00B


what will read above chip.

Or am I just having a bad day and the eeprom swap should have done the trick?

Modus 54 plate

barti122
22nd January, 2013, 01:06 PM
try read org and write to new uch

morfej
22nd January, 2013, 01:08 PM
I would say than for example firmware inside MCU's are not tottaly the same...so perhaps all data inside eeprom are not on the same positions... or the old eeprom is corrupted somehow.

albertros
22nd January, 2013, 01:37 PM
Hi, So you think swapping 95160 should do the job?

First I thought that I had fitted eeprom wrong way around but I have checked with utouched one and it is correct.

I will get UCH back from garage and try agin.

Fault = tailgate opens on its own.