PDA

View Full Version : I NEED CORRECT CHECKSUM FOR EDC17



marsete
23rd January, 2013, 01:05 PM
Hi friens i need correct checksum for this file.File is bmw serie 1 118d year 2010.I read galletto 2,for writing no is posible,galletto error checksum.Please i need correct file.Thanks and regards

PD;in folder contents original and mod

Baddog84
23rd January, 2013, 01:11 PM
file with chks

marsete
23rd January, 2013, 03:17 PM
Hi friend,very thanks for help me.I test and report

zanovo
23rd January, 2013, 06:59 PM
It`s very interesting:
1 What ECU on your car?
2 What CPU ?
3 You read in Boot Mode or through OBD2 ?
Please answer.... I thought, it`s risky to read/write this ECU....

BrunoPT
23rd January, 2013, 09:23 PM
Hello,

I've appeared for several cars these do, and always preferred to do for Tricore. Always ran fine, corrects and galletto two well checksum.

marsete
25th January, 2013, 09:56 AM
Hi friends,i read for obd,galletto read perfect,write 100X100,only problem is message; (error checksum in writing,File not original, no contact remove and reprogram original file). I reload original file and car runs.what this problem?or file checksum not correct?Galletto checksum in writing?Thanks

Baddog84
25th January, 2013, 10:34 AM
test and reports

mislav88
25th January, 2013, 11:13 AM
2010 is 100% TP, use boot mode before you brick your ecu!!

marsete
28th January, 2013, 11:13 AM
Hi friend,this week I read in boot mode,I'll give more details.Thanks

pajko
29th January, 2013, 07:11 PM
checksum OK

marsete
3rd February, 2013, 03:05 PM
Thanks Pajko,i test and report your file.That has corrected the checksum?WInols?Thanks and regards

kennfeld
4th February, 2013, 12:57 AM
Hi friends,i read for obd,galletto read perfect,write 100X100,only problem is message; (error checksum in writing,File not original, no contact remove and reprogram original file). I reload original file and car runs.what this problem?or file checksum not correct?Galletto checksum in writing?Thanks


it's because tuning protection activated

johan240
4th February, 2013, 02:20 PM
you used a clone galletto??

mario38
4th February, 2013, 04:21 PM
Hi friens i need correct checksum for this file.File is bmw serie 1 118d year 2010.I read galletto 2,for writing no is posible,galletto error checksum.Please i need correct file.Thanks and regards

PD;in folder contents original and mod

your edit is very poor, as pressure rail 16816, the rail limiter is lower ...
before losing time doing tests recheck your edit and then write the file ..

marsete
5th February, 2013, 02:50 PM
Hi friends,yes i use galletto 2 v51 clone.For this ecu not is necessary boot mode??.Galletto read and wryte ok,only checksum not correct.Thanks and regards

marsete
5th February, 2013, 02:53 PM
it's because tuning protection activated

Hi friend,in vag, galletto gives antitunnig message because BMW is not giving me any notice antituning?Thanks

marsete
5th February, 2013, 02:59 PM
Hi mario,thank you for your constructive criticism,my mods I know that my modifications are not correct at 100x100, but it thus learn to modify, at least I've learned thus.