PDA

View Full Version : Audi A4 RB4 on Def mode, Need Correct Dump


ingenierotorero
24th January, 2013, 12:48 AM
Hi!
I have an Audi A4 2.5 TDI, with RB4 8E0920 900M on Def mode.
I swap injection pump and codified with VCDS and then comes the problems.
Car doesn?t start. Cluster shows mileage correctly.
I?ve tryed to start with immo off, and don?t start.

I need repaired dump with Pin code or virgin.

Thanks.
maumaumau
24th January, 2013, 05:32 AM
can you explain step by step how you "codified" with vcds...i'm just try to understand what happen....seems to be a corupted dash dump...but,i never heard like this when you adapt injection pump with immo....i think pin code only via obd...you will need proper tool to repair dash dump...like dejavu
firestator
24th January, 2013, 03:48 PM
Hi!
I have an Audi A4 2.5 TDI, with RB4 8E0920 900M on Def mode.
I swap injection pump and codified with VCDS and then comes the problems.
Car doesn?t start. Cluster shows mileage correctly.
I?ve tryed to start with immo off, and don?t start.

I need repaired dump with Pin code or virgin.

Thanks.
I repair your dump
ingenierotorero
27th January, 2013, 11:02 PM
Thanks!!!!
This week i?ll try to start it!
ingenierotorero
2nd February, 2013, 06:17 PM
Now is on "safe" mode....:-(
ghostridersa
2nd February, 2013, 06:21 PM
Program your keys now to dash.


Now is on "safe" mode....:-(
firestator
2nd February, 2013, 08:53 PM
Now is on "safe" mode....:-(

you need to hold a binding engine and keys :)


p.s. ECU damp?
ingenierotorero
3rd February, 2013, 12:30 AM
I tryed to match keys with vcds but it?s impossible.
ECU is ok matched.
Tomorrow i?ll try to send ECu dump.
teerak2uk
3rd February, 2013, 12:41 AM
I tryed to match keys with vcds but it?s impossible.
ECU is ok matched.
Tomorrow i?ll try to send ECu dump.

correct me if im wrong but wont he need new transponders for the keys now?

what info you got with vcds scan
ghostridersa
3rd February, 2013, 08:16 AM
Post your vcds scan and we can help you.
d2mike
4th February, 2013, 08:27 PM
correct me if im wrong but wont he need new transponders for the keys now?

what info you got with vcds scan

No, he can use the current transponders.
Just match the immobilizer/keys and the problem is solved.
ingenierotorero
9th February, 2013, 01:19 PM
Hello!
Thanks for your interest!
I post cluster and ECU dumps and VCDS scan.

I?ve tryed to match keys but i can?t.
d2mike
9th February, 2013, 07:04 PM
Your login (obtained from engine ecu dump) is 05582.

Immobilizer III Immobilizer Swapping (Instrument Cluster) - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/Immobilizer_III_Immobilizer_Swapping_%28Instrument _Cluster%29)
Immobilizer III Key Matching (Cluster) - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/Immobilizer_III_Key_Matching_%28Cluster%29)

Check the lock time of your instrument cluster (MVB 024).
ingenierotorero
9th February, 2013, 10:48 PM
It?s sure 00582? I have read 05582 with vag programmer.
ingenierotorero
9th February, 2013, 10:51 PM
I knows rosstech instructions, i did all same as but car don?t start!!!
d2mike
9th February, 2013, 11:38 PM
Yes, sorry my mistake.
What's the problem? Immo3 is not that hard ;)
ingenierotorero
11th February, 2013, 09:27 PM
I don?t know, I have do it in another times....
Can you read the files that I posted?