PDA

View Full Version : Astra G Y17DT ECU problem



kalelarga
24th January, 2013, 08:32 AM
Hi to all!

I have Opel Astra G 1.7 DT MY 2001, engine will not start.
Here is diagnostics data:

OP-COM 100219a - PC based diagnostic tool

OP-COM - KW2000 Communication Window> 2001 (1)|Astra-G|Engine|Y 17 DT

Keyword #1: EF
Keyword #2: 8F

Normal timing parameter set.

VIN: Not programmed
RepairShopCodeOrTesterSerialNumber: Not programmed
ProgrammingDate: 00000000
systemSupplierECUHardwareNumber: DEL 0113386350
vehicleManufacturerECUHardwareNumber 97240621 EA
systemSupplierECUSoftwareNumber: DLNF
systemSupplierECUSoftwareVersionNumber: 0002
exhaustRegulationOrTypeApprovalNumber: D01008
systemNameOrEngineType: Y17DT

Identifier: 1305

CalibrationDate: STRCB0A


Total number of fault codes: 2

P0602 - Control Module Programming Error
(00) - Present

P1610 - Immobiliser Function not Programmed
(00) - Present


When read ECU data with CarProg,
ECU Delco 1.7l Diesel ECU v.0.15 :
immobilizer < - > ECU sinchronization data: 00000000000000000000000000000000
PIN: 0000
VIN: 0

How can I read PIN code from immobilizer box?
VagTacho & OPEL immo interface, OpCom, Opel Can Scanner, Carprog...?

Immobilizer 2 : No fault codes stored!

Please help!!!

autocargo
24th January, 2013, 08:48 AM
I think you need a working dump for this ecu...

viorelcarl
24th January, 2013, 09:00 AM
Extract dump from immo (tms or motorola) to find the pin and then reset ecu and adapt with opcom

kalelarga
24th January, 2013, 09:45 AM
Can I read immo code from immobilizer via OBD and thus?

ghostridersa
24th January, 2013, 09:55 AM
If it is a hybrid ecu then you can read the pin with opcom if you go into instruments and then read eeprom and then click on read pin. (Only if it is a hybrid ecu). Make sure when trying to program that the vin number is the same in the instrument cluster, body control unit and ecu.



Hi to all!

I have Opel Astra G 1.7 DT MY 2001, engine will not start.
Here is diagnostics data:

OP-COM 100219a - PC based diagnostic tool

OP-COM - KW2000 Communication Window> 2001 (1)|Astra-G|Engine|Y 17 DT

Keyword #1: EF
Keyword #2: 8F

Normal timing parameter set.

VIN: Not programmed
RepairShopCodeOrTesterSerialNumber: Not programmed
ProgrammingDate: 00000000
systemSupplierECUHardwareNumber: DEL 0113386350
vehicleManufacturerECUHardwareNumber 97240621 EA
systemSupplierECUSoftwareNumber: DLNF
systemSupplierECUSoftwareVersionNumber: 0002
exhaustRegulationOrTypeApprovalNumber: D01008
systemNameOrEngineType: Y17DT

Identifier: 1305

CalibrationDate: STRCB0A


Total number of fault codes: 2

P0602 - Control Module Programming Error
(00) - Present

P1610 - Immobiliser Function not Programmed
(00) - Present


When read ECU data with CarProg,
ECU Delco 1.7l Diesel ECU v.0.15 :
immobilizer < - > ECU sinchronization data: 00000000000000000000000000000000
PIN: 0000
VIN: 0

How can I read PIN code from immobilizer box?
VagTacho & OPEL immo interface, OpCom, Opel Can Scanner, Carprog...?

Immobilizer 2 : No fault codes stored!

Please help!!!

ghostridersa
24th January, 2013, 09:56 AM
If its not a hybrid ecu then lend a Tech2 from a friend and it will work.

perovuk
24th January, 2013, 10:24 AM
read tms from immo 2 and post dump to get security code

kalelarga
24th January, 2013, 10:39 AM
:hmmmm2:
Here is Dump from ECU (with CarProg) and Dash (OpCom).
I think someone made a mistake reset ECU
:hmmmm2:

antibisic
24th January, 2013, 11:08 AM
This astra don,t have pin in the dash

kalelarga
24th January, 2013, 11:17 AM
Yes, i Know.

elchip
24th January, 2013, 11:45 AM
Yes, i Know.

U have diesel in ECU !
After reprogram it will back again ...
Not good solution only to reprogram ECU.
U need open and clean diesel.
All will be fix.
And reprogram if not late ...
Regard's

perovuk
24th January, 2013, 11:55 AM
from my experience,and I had this problem a few times,was always bad bateri

Shmortz
24th January, 2013, 01:43 PM
after those errors in ECU there is need to reprogram eeprom with good dump, if problem occures again, replace eeprom with new one and there will not have problems again, but first of all problem with fuel in ECU must be solved...
and read TMS from immobox to get pin code...

jarfm
25th January, 2013, 08:49 AM
I solved the same problem 1 week ago, just do what DK members say. Program ECU eeprom 95320 with working dump and synchronize it with immo. But first of all U must get PIN code from immo (TMS) to enable programing.
What diesel in ECU? Someone did not get it right :)

kalelarga
25th January, 2013, 04:54 PM
Yes, this was the fuel inside ECU (I do not know where). I gave it to my friend Immobilizer PIN obvious, I hope to solve the problem.

amibios
25th February, 2013, 10:25 PM
Hi,

Diesel in the ECU is a common fault on Astra Y17DT engine.
a faulty advance valve in the injection pump leaks and diesel ratch the ecu by capilarity throught the electrical cable.
if the advance valve is not replaced ECU will fail