View Full Version : BMW 120d not start ecu exchange
michalik
24th January, 2013, 07:01 PM
Hello everyone, I hope you can help me I'm a long time with this problem.
I have to replace the ECU of a 2007 BMW 120d, I've got the same ECU l but "used", and I have only the original car EEPROM.
alignment is possible?
I hope you can ayudarme.gracias
bmw opps tool.
bmw 120d 2007
ecu edc 16 DDE 7 803 373
bosch 0 281 013 501
bmw320d
24th January, 2013, 07:06 PM
yes alignment to cas-dde, or read with bdm original ecu and write to used ecu
michalik
24th January, 2013, 07:23 PM
yes alignment to cas-dde, or read with bdm original ecu and write to used ecu
hi thanks, the original car ecu can not be read, no communication, and not let it be read by BDM, I can only rescue the eeprom.
I recommended you?
jolidj
25th January, 2013, 01:51 AM
try to find same beckup with same sw and hw and write your eeprom.
try this and see with opps if have error.
michalik
25th January, 2013, 03:12 AM
hello, Deputy dumps: used ecu / ecu original / eeprom cas3
thank you very much.
16eddi67
25th January, 2013, 07:41 AM
hello, Deputy dumps: used ecu / ecu original / eeprom cas3
thank you very much.
hi,
hier cas3 +used ECU
uchtool
25th January, 2013, 08:13 AM
hello, Deputy dumps: used ecu / ecu original / eeprom cas3
thank you very much.
Hello!
put that and use alignment:eating:
michalik
26th January, 2013, 12:01 AM
Hello!
put that and use alignment:eating:
yes! cheers and thanks, you deserve it.
thank you very much for your great help.
I hope I can help at some time.:champions::congrats:
michalik
26th January, 2013, 12:10 AM
hi,
hier cas3 +used ECU
hello, I could not prove it, but thank you for your help.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.