saayinla
26th January, 2013, 01:18 PM
Hi All,
I am having problem setting up the Hard disk in my New Solo2 Box. Its been very easy to setup on the Vu+ Duo as I ve done this like 10 times at least.
But the Solo2 is behaving badly. The Hard drive was taken from a Portable USB drive I hard and it didnt work so I took it out and formatted it on a PC again to no avail. I cant see it in Telnet. See screenshot attached and its not in fstab as well.. not very clued up on Unix though but trying a little bit.
https://lh3.googleusercontent.com/-gg61ho0cLls/UQPEw62ILAI/AAAAAAAALEs/-S96Z0RGxiE/s528/screenshot%2520%25281%2529.jpg
https://lh6.googleusercontent.com/-5R-6poVbF3Q/UQPExOSWU8I/AAAAAAAALEw/KuAtQl6JeOU/s526/screenshot.jpg
https://lh6.googleusercontent.com/-aqw-ZhvtARQ/UQPExowwEhI/AAAAAAAALE8/9gsOcnZwWmM/s946/screenshot%2520%25282%2529.jpg
Also is the Output of my Telnet Session.. I tried to format the drive
login as: root
root@192.168.1.88's password:
root@vusolo2:~# df -h
Filesystem Size Used Available Use% Mounted on
ubi0:rootfs 196.6M 52.1M 144.5M 27% /
devtmpfs 279.1M 4.0K 279.1M 0% /dev
tmpfs 64.0K 0 64.0K 0% /media
tmpfs 279.2M 84.0K 279.1M 0% /var/volatile
root@vusolo2:~# more /etc/fstab
rootfs / auto defaults 1 1
proc /proc proc defaults 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
usbdevfs /proc/bus/usb usbdevfs noauto 0 0
tmpfs /var/volatile tmpfs defaults 0 0
usbfs /proc/bus/usb usbfs defaults 0 0
root@vusolo2:~# login as: root
Filesystem Size Used Available Use% Mounted on
ubi0:rootfs 196.6M 52.1M 144.5M 27% /
devtmpfs 279.1M 4.0K 279.1M 0% /dev
tmpfs 64.0K 0 64.0K 0% /media
tmpfs 279.2M 84.0K 279.1M 0% /var/volatile
root@vusolo2:~# fstab
-sh: fstab: not found
Password:
proc /proc proc defaults 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
usbdevfs /proc/bus/usb usbdevfs noauto 0 0
tmpfs /var/volatile tmpfs defaults 0 0
usbfs /proc/bus/usb usbfs defaults 0 0
root@vusolo2:~#
root@vusolo2:~#
root@vusolo2:~# mkfs.ext3 /dev/sda1
mke2fs 1.42.6 (21-Sep-2012)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
30531584 inodes, 122095872 blocks
6104793 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=0
3727 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
102400000
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
Please help.
Thanks in advance.
I am having problem setting up the Hard disk in my New Solo2 Box. Its been very easy to setup on the Vu+ Duo as I ve done this like 10 times at least.
But the Solo2 is behaving badly. The Hard drive was taken from a Portable USB drive I hard and it didnt work so I took it out and formatted it on a PC again to no avail. I cant see it in Telnet. See screenshot attached and its not in fstab as well.. not very clued up on Unix though but trying a little bit.
https://lh3.googleusercontent.com/-gg61ho0cLls/UQPEw62ILAI/AAAAAAAALEs/-S96Z0RGxiE/s528/screenshot%2520%25281%2529.jpg
https://lh6.googleusercontent.com/-5R-6poVbF3Q/UQPExOSWU8I/AAAAAAAALEw/KuAtQl6JeOU/s526/screenshot.jpg
https://lh6.googleusercontent.com/-aqw-ZhvtARQ/UQPExowwEhI/AAAAAAAALE8/9gsOcnZwWmM/s946/screenshot%2520%25282%2529.jpg
Also is the Output of my Telnet Session.. I tried to format the drive
login as: root
root@192.168.1.88's password:
root@vusolo2:~# df -h
Filesystem Size Used Available Use% Mounted on
ubi0:rootfs 196.6M 52.1M 144.5M 27% /
devtmpfs 279.1M 4.0K 279.1M 0% /dev
tmpfs 64.0K 0 64.0K 0% /media
tmpfs 279.2M 84.0K 279.1M 0% /var/volatile
root@vusolo2:~# more /etc/fstab
rootfs / auto defaults 1 1
proc /proc proc defaults 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
usbdevfs /proc/bus/usb usbdevfs noauto 0 0
tmpfs /var/volatile tmpfs defaults 0 0
usbfs /proc/bus/usb usbfs defaults 0 0
root@vusolo2:~# login as: root
Filesystem Size Used Available Use% Mounted on
ubi0:rootfs 196.6M 52.1M 144.5M 27% /
devtmpfs 279.1M 4.0K 279.1M 0% /dev
tmpfs 64.0K 0 64.0K 0% /media
tmpfs 279.2M 84.0K 279.1M 0% /var/volatile
root@vusolo2:~# fstab
-sh: fstab: not found
Password:
proc /proc proc defaults 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
usbdevfs /proc/bus/usb usbdevfs noauto 0 0
tmpfs /var/volatile tmpfs defaults 0 0
usbfs /proc/bus/usb usbfs defaults 0 0
root@vusolo2:~#
root@vusolo2:~#
root@vusolo2:~# mkfs.ext3 /dev/sda1
mke2fs 1.42.6 (21-Sep-2012)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
30531584 inodes, 122095872 blocks
6104793 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=0
3727 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
102400000
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
Please help.
Thanks in advance.