PDA

View Full Version : FORD FOCUS 1.6TDCI DPF DELETE REQUEST



motorsportsz
28th January, 2013, 09:38 PM
Hi there
need a dpf to be deleted on this 2006 ford focus 1.6tdci please


1037380350

DPF has been removed

cheers

chucky69
28th January, 2013, 10:48 PM
Hi try this and report! Pass in PM.

motorsportsz
28th January, 2013, 11:37 PM
Tried it no luck. Anyone else? I don't mind paying

kevfield
29th January, 2013, 12:53 AM
Your file off

chucky69
29th January, 2013, 10:11 AM
Tried it no luck. Anyone else? I don't mind paying

Did you delele dtc by diag?

motorsportsz
30th January, 2013, 11:29 PM
Your file off

Cheers buddy. No luck. Car is still in limp mode with these codes172631

kevfield
30th January, 2013, 11:42 PM
Fix glow plugs and reset counters, diagun will not work for this car i have tryed in the end i needed ford VCM

Thanks kev

motorsportsz
31st January, 2013, 12:18 AM
Fix glow plugs and reset counters, diagun will not work for this car i have tryed in the end i needed ford VCM

Thanks kev

Cheers buddy

Will this do the job?
http://www.aliexpress.com/item/Newest-Ford-VCM-OBD-Diagnostic-Tools-cable-ford-vcm-vehicles-Automatic-ECU-scan/688015830.html

kevfield
31st January, 2013, 12:28 AM
I am not sure about usb vcm, i know that some autocoms,s can make it but only with OKI chip , this is only something i have been told !!

Thanks kev

flyins
31st January, 2013, 12:34 AM
I wouldnt use mini vcm mate, i used one and when plugging it in it caused engine malfunction to light up on dash. So i unplugged it and never used it again. Yes it worked at first but it didnt take long to mess up. Have you access to autocom? My autocom does the reset of additive

motorsportsz
31st January, 2013, 02:07 AM
Where can I buy a good autocom from? Decent clone

chucky69
31st January, 2013, 09:06 AM
Limp mode you got because you have wrong glow plugs, repair it. I can erase DTC about additive or you can reset it in ecu.

bursuc
2nd April, 2013, 10:23 AM
Limp mode you got because you have wrong glow plugs, repair it. I can erase DTC about additive or you can reset it in ecu.


Are you sure limp mode is because " because you have wrong glow plugs " ???

alexm
29th April, 2013, 03:02 PM
Hello.
I have the same problem. Errors P2584 and P2585.
There Autocom and have the opportunity to take Ford CMV (experience with it is not).
The problem will be solved when the count additives? Maybe the best of the firmware error codes to delete?