PDA

View Full Version : Vauxhall AGILA B remote lock programming procedure??


obdmaster
29th January, 2013, 01:49 PM
Tried to program new remote on 2009 AGILA B.

Was told to use suzuki swift can procedure from advanced diagnostic manual, which i did unsuccessfully.

Does anyone know correct procedure?? Or is the procedure correct and i have a faulty vehicle not takin the remote???

Many thanks as always
paul_12345
29th January, 2013, 04:49 PM
from wikipedia "Also called Suzuki Splash Vauxhall Agila"

from autodata
http://img21.imageshack.us/img21/721/newbitmapimage2d.jpg
(http://en.wikipedia.org/wiki/Vauxhall_Agila)
obdmaster
31st January, 2013, 10:02 PM
Autodata is wrong it was a sequence that i got from a vauxhall technician in the end. thanks for trying though paul m8
gurmk
23rd April, 2013, 02:10 PM
I have the same problem any chance of sharing th eprocedure/
P&D
2nd December, 2015, 01:20 PM
Hi all anyone have the correct info for this please

The programming for the vauxhall is different to the Suzuki........
p1et
2nd December, 2015, 02:01 PM
1. OPEN drivers door.

2. Switch Ignition ON, then remove key.

3. PRESS and release drivers side door light switch 3 times or CLOSE and OPEN the driversdoor 3 times.

4. Switch Ignition ON, then remove key.

5. All doors should LOCK and UNLOCK to indicate programming mode.

6. Press UNLOCK on remote control to program.

7. All doors should LOCK and UNLOCK to indicate programming has been successful.

NOTE : To program additional remotes repeat the whole procedure.

NOTE : Remotes are not deleted during the programming procedure unless the MAX number of remotes is reached, then the oldest remote is overwritten.

Try this.
P&D
2nd December, 2015, 02:08 PM
Many thx ....is this from autodata ? IF so its wrong doesn't work

But thanks anyway....Phil
p1et
2nd December, 2015, 02:47 PM
It's from here: http://www.wikirke.co.uk/vehicle.php?vh=402

I don't have autodata so can't compare each other
P&D
2nd December, 2015, 03:50 PM
Looks like all the Suzuki's is the same as the Agila A/B....but the car will still not enter programming mode ......Strange
autochei
2nd December, 2015, 03:58 PM
step 6 it s wrong u need press lock not unlock
https://www.youtube.com/watch?v=Sm-ZzB3-3r4
P&D
2nd December, 2015, 04:03 PM
Many thx for the reply

Never gets this far.....won't enter programming mode doors lock/unlock automatically to tell you the car is in programming mode
to press the button on the remote.

Do you need at least one working remote to do this ? program a 2nd one ?
autochei
2nd December, 2015, 08:35 PM
no need a good remote