replaced ecu 04 4runner

[hass42]

Hey guys need help with this,
Vehicle brought in to me with different donor ECM need to reprogram keys. I have a new key and 1 old key.

dump from immo p/n 89780-35090 93lc66b
I would like to immo off but
Anyhelp would be appreciated

[eeddyy23]

Hey guys need help with this,
Vehicle brought in to me with different donor ECM need to reprogram keys. I have a new key and 1 old key.

dump from immo p/n 89780-35090 93lc66b
I would like to immo off but
Anyhelp would be appreciated
please check pm !!

[hass42]

I did everything you said i also tried it 3 time and theft light still flashing and no crank code b2799 in ecm if that helps

[koncimobil]

post original ecu & immo dumps

[hass42]

I Dont have original ecu....I have donor in car. Dump for immo is in post #1. Also which chip to read out of ecu?
Thanks

Sent from my DROID RAZR HD

[koncimobil]

read new ecu
read immo box

[hass42]

I opened ecu and can find chip to read off can you help with this pic?

[koncimobil]

read ic601 93xxxx as 16bit.

[ray-ray]

Sink the immo to the ECU by ground out the data port. OBD2 pin 4 & 13 for 30 min. With key to the on. After time is up use toyota orange dongle to register your 4d-67 chip to the system.

[hass42]

try this???
took me a minute to get it read....hope its right

[hass42]

Immo dump in post #1

Sent from my DROID RAZR HD

[ray-ray]

Still need to sink the immo to the ECU or marry immo to the ECU. Orange dongle would reset the immo. With in a few minuite.

[hass42]

I Dont have dongle but do have a iscan2 that can register keys if ecu and immortal match

Sent from my DROID RAZR HD using Tapatalk 2

[bram380]

Hey guys need help with this,
Vehicle brought in to me with different donor ECM need to reprogram keys. I have a new key and 1 old key.

dump from immo p/n 89780-35090 93lc66b
I would like to immo off but
Anyhelp would be appreciated

Bad dump.
Read again eprom as 16 bit

[hass42]

heres every way i can read using xprog

[koncimobil]

heres every way i can read using xprog

this dump is from ecu.
where dump immo box?

[hass42]

this dump is from ecu.
where dump immo box?
post #1 Im sorry

[hass42]

Bad dump.
Read again eprom as 16 bit
Just realized you were talking about immo dump
hold on

[hass42]

this zip has all
Thanks for all your support

[hass42]

Still need help please....

[hass42]

Alright, I think if I get this done I should be ok?

I need to erase all keys and program one or both of these keys to be registered master to my immo box. Then I may be able to program using compatable scan tool
Immo box data reads that none of my keys are registered as master. I tried to do with carprog and it didnt work??

Key 1 id= 7E 52 CC 0A 00 01 66 06

Key 2 id= 7E B2 8F 2D AA CO 56 15

If ANY one can help I really appreciate it THANKS

[ray-ray]

ECU & immo combo = reset immo to learn mode, regesiter keys. Now the immo has key store 2 master 1 valet.
ECU need to be married to the immo so car can start. Go to the obd2 jump wire across 4 & 13 for 30 min with ignition to the on.

[hass42]

I cant get immo to register any key I have as a master. If I can get that to happen I think then I would be able to marry ecu to IMMO? right?

[hass42]

New chip read outs in 16bit

Key 1 id= 7E 52 CC 0A 00 01 66 06

Key 2 id= 7E B2 CF 16 D5 B0 AD 06

[koncimobil]

All keys in Tiris format or read by zedbull stand alone?

Immo box part no. ?
Bad dump immo box.
Remove eprom from board & read again.
Wrong type eeprom, wrong type data.
So select correct type eprom.

[hass42]

Ok

immo p/n 89780-35090 93lc66b

give me a minute

[hass42]

try this??
I read as 93c66 wrong type? Or Maybe chip damaged?

[hass42]

Can anyone tell if this is good dump?

[keygargoil]

New chip read outs in 16bit

Key 1 id= 7E 52 CC 0A 00 01 66 06

Key 2 id= 7E B2 CF 16 D5 B0 AD 06

your immo is a bad dump whatss the part number il make a new file for you

[hass42]

P/n 89780-35090

Thanks hope this works....fingers crossed

[hass42]

Any luck on that file Keygargoil?

[ray-ray]

All could have been done with quick reset orange toyota smart dongle (china clone tool under $20.00)

[keygargoil]

New chip read outs in 16bit

Key 1 id= 7E 52 CC 0A 00 01 66 06

Key 2 id= 7E B2 CF 16 D5 B0 AD 06

here try this bridge pins 4 and 13 for 35 mins with ignition on make sure the lights are flashing on the dash

[hass42]

Thanks .......I will try and report!