BMW X6 E71 cAS4? FRM3R

[88diablo]

I have a BMW X6 2010 with MC9S12XEQ384MAG 3M25J Does anyone know what tool I can use to read this. I have Rosfar red and R270 but cant see this mask on either.

Thanks for any help.

[rukartinatv]

I have a BMW X6 2010 with MC9S12XEQ384MAG 3M25J Does anyone know what tool I can use to read this. I have Rosfar red and R270 but cant see this mask on either.

Thanks for any help.

this is cas3+

[88diablo]

Ok thanks for that. I can read it diag with didgy clone but it won't program. Will rosfar red or r270 do these, if so which menu do I use?

[markony79]

I never see this MCU in X6 or another Cas, even I was do X6 2011..its was CAS3....XDP512

[88diablo]

I'm not sure I've got the right box. This says FRM in it but it has the chip stated inside so I thought that must be it. It was in the drivers side foot panel. Is this the correct unit?

[88diablo]

This is the unit I found.

[markony79]

This is the unit I found.

post last 7nr from VIN...I will give you exactly what this car have it
cas3 or cas4

this on your picture is not Cas3 or Cas4 for...its FRM modul....for ligths


your cas is 30cm under lights switch,little on the rights side from switch.....you have there 2 plast part with torx25 2 or 3 scrow, take out this scrow, and take out the plast under, which is go to pedal , gas and breaks
directly in between left and the middle scrow is you CAS...can see to conectors
the cas is hold 4 white color clips....take on the side and pull CAS down

[88diablo]

Hi, thanks its LL71163

[markony79]

this is your car.....
06/2010 E71 X6 30dX SAC N57 Europe Right hand drive Automatic
right hand stering wheell...nice

now i will post the cas

[markony79]

your cas is CAS3 , original part nr 61359227053

or if it cas changed last year with new one , then is 61136913652

[88diablo]

Thank you so much for this info, I have now found the CAS unit.

[TULGEYWOODMAN]

bright inspection light and new glasses needed.

[CARPARTS]

bright inspection light and new glasses needed.

....cloned ?

[JOHNCICY]

I have a BMW X6 2010 with MC9S12XEQ384MAG 3M25J Does anyone know what tool I can use to read this. I have Rosfar red and R270 but cant see this mask on either.

Thanks for any help.
Hey mates,i have the same m c u in Nissan Altima 2011 inside BCM.i cant see any option in xprog version 5.0.but i had a same car with 1l15y which xprog does it in 3secs.which prog works well with ths chip?