VW Polo 1.0 engine AER immo off - help please

[psam]

Hi to all,

I've this Polo 1.0, yr 1999, engine AER without engine ECU. I found an used one: Bosch 0 261 203 932 (VW 030 906 027 E) and it came with the immo box. I read TMS370 inside immo box, produced the corresponding transponder (ID42) and prepared my self to start the car.
However the car didn't started!!!
According to VagCom immobilizer it's blocking the start. So I think the immo box I got with the ECU it's not from the same car.
Since I've already spent several hours around this "simple" matter, I'm thinking on going to immo off!

Please give me your thoughts about this matter...

What shall I do to do immo off?
I read a post mentioning to upload a new file to 24C02 (on ECU, I think). In this case shall I disconnect immo box from the car? Disconnect aerial ring?

Please help!!!

Thank you so much in advance!!
All my best,
PM.

[roman_auto]

you should read this 87C510 for immo off

[kitioni]

or 27c512 eprom

[roman_auto]

or 27c512 eprom

yes or you have there 2 flash read and upload

[gttuning]

read 87C510 like roman auto said and post your file.27c512 is in bosh 0 261 203 931.

[psam]

read 87C510 like roman auto said and post your file.27c512 is in bosh 0 261 203 931.


Please forgive me... probablly I'm being naif... but I can't find the mentioned 87C510.

I've attached photos of the ECU and Immo box. Please point me the correct eprom to read.

Thanks again!!

[ciptel07]

hello, if you already read TMS and you program transponder find security code and make sincro in canel 050.

[psam]

hello, if you already read TMS and you program transponder find security code and make sincro in canel 050.


Chanel 50 of VagCom right? But, if the immo box it's not from the same car as the ECU it will work anyway?

[d.zio]

b58546 is the 87c510........is the chip with white label

[psam]

b58546 is the 87c510........is the chip with white label


YES!!! I thought it was, but wasn't finding any info about it. Now, I've found it!
I'm going to read it!!

[Newbie111]

hello, if you already read TMS and you program transponder find security code and make sincro in canel 050.

It?s nice here !!!!

[psam]

YES!!! I thought it was, but wasn't finding any info about it. Now, I've found it!
I'm going to read it!!

Afterwards I can't read the 87C510. I thought my Willem Programmer could read it but it seems that it doesn't...

I'm stucked again!!

Do you think that I should try the adaptation channel 50?

Thanks people!!

[immokill]

If you have transponder paired with immobox and used ecu ,then you go with vagcom in 25 then 10 (adaptation) and chanell 00 and save it.

[psam]

If you have transponder paired with immobox and used ecu ,then you go with vagcom in 25 then 10 (adaptation) and chanell 00 and save it.

Thank you!
I think I've already tried that, but as soon as I go back to the car I'll try again.
Of course that one of the problems here it's the distance between me and the car. If I had the car next to me it would be much easier to issue some experiences...
Thats's why I'm trying to gather all the info possible, before I went to the car again.

[Shmortz]

I agree that if you have immo with transponder only need to go in chanel 00 in immo adaptations, Read, Save and done, ignition OFF then ON and start the engine with new ECU

[psam]

I agree that if you have immo with transponder only need to go in chanel 00 in immo adaptations, Read, Save and done, ignition OFF then ON and start the engine with new ECU

I didn't managed to start the car yet... followed those steps SEVERAL times, but nothing!!!
Thanks anyway my friend!

[psam]

you should read this 87C510 for immo off

Finally I've received the adaptor to read this 87C510! Car it's still stopped!!

Please if someone can give me immo off from the attached dump.
Thank you SO MUCH!!

[psam]

Someone please.
Thanks!

[psam]

Immo off, please.
Thank you.

[gttuning]

Hi try this not tested. please report result.pass pm

[catala20032004]

Your file off. Try and report

[psam]

This Polo it's really cursed!!!
Now that I've the 87c510 immo off, I can't write it!!!! It seems this eprom it's OTP. Is it??
I've tried OVER HOURS without sucess!!! Always error on writing the single modified byte!!

Any other sugestion?

Thank YOU SO MUCH!!!

[maglaras]

read the 24c02 eerom and send it here
is the eerom b58

[szirs]

I have the same problem reading Include b58