PDA

View Full Version : Volvo V50 1,6D DPF problems ?



markovojvodic
8th February, 2013, 10:05 AM
Volvo V50 1,6D DPF problems

Can someone help me with this ?

Anyone has some experience with it ?

Thank you in advance

furnata
8th February, 2013, 10:50 AM
What is the problem? Its edc16c34 like PSA

markovojvodic
8th February, 2013, 10:52 AM
Its EDC16 similar to PSA but its different on Volvo a bit i have a lot of experience with PSA but Volvo isnt like it

assitutto
8th February, 2013, 10:58 AM
post ori file, maybe i can help

markovojvodic
8th February, 2013, 11:11 AM
Ok i will post later today .....

markovojvodic
8th February, 2013, 11:13 AM
i was just wondering did anyone had experience with Volvo and come up with some solution ?

furnata
8th February, 2013, 11:27 AM
After DPFoff i just disconnect DPF ECU from under back seat. No problems yet- tested on five cars also Ford and Mazda 1.6

markovojvodic
8th February, 2013, 11:34 AM
I found ECU and disconnected it already - what happends if i dont do anything on engine ECU ?

Did you completely remove DPF or left it in ?

furnata
8th February, 2013, 11:45 AM
I remove from SW and HW -thats all

markovojvodic
8th February, 2013, 12:03 PM
Ok thank you i will post dump later today

markovojvodic
9th February, 2013, 11:06 AM
Flash in attach with DPF on

0281011475

furnata
11th February, 2013, 10:30 AM
Here the switch solution test it
PW in PM

markovojvodic
16th February, 2013, 07:59 PM
Finally i got time to mess with Volvo

i inserted your file plus little modification for few more hp and car is running normally to 4500rpm .
in monday i we will have it completed bcs now all the radiators and intercooler is dismantled including DPF and it will be ready for tet drive

only problem is that red square on dashboard is on and on vida dice diag i have DTC in ECM - engine control unit checksum faulty *?

markovojvodic
16th February, 2013, 07:59 PM
but car started normally and engine MIL lamp is off

markovojvodic
16th February, 2013, 09:37 PM
I also disconnected aditive ecu and there is constant error in engine ecu of it

Sent from my ST25i using Tapatalk 2

furnata
17th February, 2013, 11:01 AM
What DTC have now - some like U1000 unknow error or other?

markovojvodic
17th February, 2013, 12:21 PM
Tommorow or day after i will return parts back on car and will try it . I will send you screenshot of dice diag to see it after a test drive

Sent from my ST25i using Tapatalk 2

koira
17th February, 2013, 02:57 PM
If using just switch solution you must leave additive ecu connected, otherwise it gives constant error on dashboard.
Also there will be one dtc left in ecu about some sw-modified error. No mil visible or other problems, just ignore the dtc.

markovojvodic
17th February, 2013, 03:44 PM
Help me - switch solution is ?

Sent from my ST25i using Tapatalk 2

markovojvodic
17th February, 2013, 04:12 PM
Only activation of dpf excluded or ?

Sent from my ST25i using Tapatalk 2

koira
17th February, 2013, 06:52 PM
You already got a file. Is it not working?

markovojvodic
17th February, 2013, 07:26 PM
Its working but i will test in few days when car will be completed

Sent from my ST25i using Tapatalk 2

furnata
18th February, 2013, 11:31 AM
I make switch solution for you - so must work its tested
BR

yas200
18th February, 2013, 11:54 AM
Correct dpfoff - switch + remove 1 dtc u0301 off

furnata
20th February, 2013, 11:22 AM
Correct dpfoff - switch + remove 1 dtc u0301 off


True but i can't do this

markovojvodic
22nd February, 2013, 06:52 PM
All is completed i rhink its ok no mil is on dtc is :

Sent from my ST25i using Tapatalk 2

markovojvodic
22nd February, 2013, 08:04 PM
DPF is completely removed, i put file furnata made mod for me , no MIL is on, on dash everything is ok , only on diag you see couple of DTC you can see on screenshot in attach.

Car is running normally , i will test it couple of days and post result.

For now everything is excelent.

Thanks to Furnata

markovojvodic
22nd February, 2013, 08:06 PM
and DPF Ecu needs to be connected otherwise red triangle light is on on the dashboard

Music73
24th February, 2013, 10:52 AM
I have just been doing a c30 and it was ok at first then it ran low on additive so made a couple of errors tried just unplugging additive ecu but left red triangle on dash so put some fluid in reset level and then put a screw in the end of the outlet and and put pipe back on tank.

Sent from my HTC One X using Tapatalk 2

markovojvodic
24th February, 2013, 07:53 PM
I have made 150km all is ok - so i think this is it ...

Car is running better and even seems like consumption is smaller