Esitronic 2012-4, missing EDC16C3 system in KTS for Renault 1.9DCI

[Shmortz]

Hello friends, recently upgraded my esitronic to version 2012/4, I realized today that there is no fuel system EDC16C3 for Renault 1,9 DCI F9Q812 engine. I called a friend with version 2012/1, that I was working before and he said that the system is there, but I'm sure it's there because I've done diagnostics on that Renault a month ago with version 2012/1.
Someone else has encountered this problem?
Can someone with version 2012/4 check that exists the fuel system EDC16C3 for Renault Scenic II with engine code F9Q812.

Thanks in advance!

[cinci13]

esitronik 2012/4

[cinci13]

esitronic 2012/4

[Shmortz]

What exactly does this document

...I have added pic' in first post...

[Shmortz]

nobody have the same problem ?

[mipmf]

I have same problems..missing stuff in 4.2012 ..I cant code injectors on Krafter,can see in diagnose screen some injection sistems( at astra g :1.7 dti, multec S ) missing!!
Can someone tell me if 2013.1 solve that problem?

[Shmortz]

wow, this is very bad, I hope someone with newer 2013 share expirience...

...by the way is there any opton to downdate to 2012/1 version?

[stoyanov]

Did you try to mark all EDC16 on expanded menu and try to search ECU?I think you must connect to engine ECU on this car with ESI 2012/4

[nesmark]

Hi.
I`ve new 2013/1,but all is as 2012/4.Missing too much system,not for only Renault.
For now i search other way ,but not result.Maybe we can work with 2012/1 for all system.

best regards

[Shmortz]

Did you try to mark all EDC16 on expanded menu and try to search ECU?I think you must connect to engine ECU on this car with ESI 2012/4

m8, I was working with this system before update to 2012/4, and so far I found that there is problem in keygen for 2012/4 and 2013/1, there is also missing many diesel fuel system and some petrol, I will try to flash old firmware in KTS and use again version 2012/1...

[mipmf]

wow, this is very bad, I hope someone with newer 2013 share expirience...

...by the way is there any opton to downdate to 2012/1 version?



I inslall yesterday 2013.1 ,but not tested....
No option to downdate....must reinstall old version...
I use 2012.4 kg. at 2013.1 and works for me....:manuscarf:

[Shmortz]

I inslall yesterday 2013.1 ,but not tested....
No option to downdate....must reinstall old version...
I use 2012.4 kg. at 2013.1 and works for me....:manuscarf:

you mean that everything that was missing in 2012/4 is working on 2013/1?

[SANTI-MECCANICA]

Also about the BMW [e46] is not within the engine ECU of 136hp and a opel frontera B either.

Have any solution?

[Shmortz]

AFAIK solution is to use 2012/3 version...

[rachmach]

i have 1/2013 is the same as 4/2012
i want to instal 2/2013 and test it