VTS_Tibi
8th February, 2013, 11:24 PM
Hi Guys,
I would have to reomve the EGR from a Skoda FabiaI., but the guy the car came from erased the fault codes before it got here, and he can't recall the DTC number....
He only remembers that the description was "EGR flow insufficient". (this is not enough, as only the code number is stored in hex format, and not the description)
I did a bit of research, and it can be the following:
P0400 - EGR flow malfunction
P0401 - EGR flow insufficient
P0402 - EGR excessive flow
P0403 - EGR circuit malfunction
I think the P0401 is the most relevant. But the car now has a non-EGR cylinder head, so it will never operate EGR in that manner...
I told him if disabling these will not solve his issue he should read out the DTC, note the number and we'll modify the original dump according to that.
So a bit of data about the car: Skoda Fabia 1.2 12V with Siemens 5WP44223 Simos 3PG
Please help me to turn off the EGR function and the DTCs. I attached the original dump from the AM29F400BB.
Regards,
Tibi
I would have to reomve the EGR from a Skoda FabiaI., but the guy the car came from erased the fault codes before it got here, and he can't recall the DTC number....
He only remembers that the description was "EGR flow insufficient". (this is not enough, as only the code number is stored in hex format, and not the description)
I did a bit of research, and it can be the following:
P0400 - EGR flow malfunction
P0401 - EGR flow insufficient
P0402 - EGR excessive flow
P0403 - EGR circuit malfunction
I think the P0401 is the most relevant. But the car now has a non-EGR cylinder head, so it will never operate EGR in that manner...
I told him if disabling these will not solve his issue he should read out the DTC, note the number and we'll modify the original dump according to that.
So a bit of data about the car: Skoda Fabia 1.2 12V with Siemens 5WP44223 Simos 3PG
Please help me to turn off the EGR function and the DTCs. I attached the original dump from the AM29F400BB.
Regards,
Tibi