Log in

View Full Version : Renault Scenic II 1.6 16V S3000 PIASINI


elchip
10th February, 2013, 05:14 PM
Hello to all is any user who have full DUMP FLASH read with PIASINI from Renault Scenic II 1.6 16V manual transmission.
File need be full 512 kb.

Many thank's
albertros
11th February, 2013, 10:26 AM
https://dl.dropbox.com/u/4682342/s3000%20piasini

Read on bench. This was the first time I used my clone piasini. If not good I have car in workshop and will read. I also have with MPPS
elchip
11th February, 2013, 11:42 AM
https://dl.dropbox.com/u/4682342/s3000%20piasini

Read on bench. This was the first time I used my clone piasini. If not good I have car in workshop and will read. I also have with MPPS

Many thank's

Writes success will test today and report.
elchip
11th February, 2013, 05:51 PM
Its work perfect.Your file is 100% OK.
Many many thank's again.
albertros
11th February, 2013, 10:07 PM
Hi,
thanks for update.
I can not get miy plasini to write, only read on this ECU
Did you do it on the bench?
Can you tell me if the attached is correct?

I must admit I have not spent much time on this, but knowing the diagram was good or bad would be a help.

Thanks
elchip
12th February, 2013, 09:59 AM
Yes it is OK 100% but use 470 ohm resistor ;-)

Regard's