Chevrolet Aveo 2005 keys problem

[Jose19]

Hi to all

Is possible to synchronize this two keys directly in to dump file, ready to start?
Those keys are original from the car but dosent work, the car was dead batery and now dosent start because of immo.
I have try to re-synchronise with MVP but not work.

Here dump file from immobox and ID keys;

Remote key B6 43 AE 23 AF 65 87 65
Normal key B6 42 1E 8F A3 7D 87 65

Many thanks

BR

Jose

[obdmaster]

Usually when battery goes flat on daewoo/chevrolet, the immobox goes out of synch with engine ecu. Use MVPpro to re-synch immobox to engine ecu. If you havent tried already m8

[Jose19]

Usually when battery goes flat on daewoo/chevrolet, the immobox goes out of synch with engine ecu. Use MVPpro to re-synch immobox to engine ecu. If you havent tried already m8
"..... I have try to re-synchronise with MVP but not work...."

[rashid01]

frist all fuse and try synchronise with sbb

[rashid01]

check all fuse and rely

[Jose19]

check all fuse and rely
Hi

All fuses and relays are ok, the problem is keys, i dont have SBB only MVPpro.

BR

Jose

[ninja123]

post a picture of immo box, i just done one like this and dump was corrupt, you need good dump and re sync ecu with mvp, add your old keys with zed.

ill make you a good dump later....

ninja

[Jose19]

post a picture of immo box, i just done one like this and dump was corrupt, you need good dump and re sync ecu with mvp, add your old keys with zed.

ill make you a good dump later....

ninja
Here friend

I apreciate your help.

BR

Jose

[ninja123]

try this dump, then do learn procedure with mvp, then re fit obd plug cover before starting.

ninja

[Jose19]

try this dump, then do learn procedure with mvp, then re fit obd plug cover before starting.

ninja
Thanks friend

I will try as sun as possible and give replay.

BR

Jose

[Jose19]

Hi friend

I have try, but no succes, MVP find immobox, but when i try to adapt keys keep saying " please wait ..trying to comunicate.... " for long time and dont make anything.
What do you thing aboat this?

BR

Jose

[richard27]

transponer tip : 48
id:1.key B6 43 AE 23
id:2.key B6 42 1E 8F
If the data they need to work towards try

[madzar]

Here is example for key and immobilizer dump.I had problems and I solvet it after replacing 93c56.Some programmers read 93cXX swaped.
Synchro with T300

[Jose19]

Hi friends

I will try and give report

BR

Jose

[ninja123]

Hi friend

I have try, but no succes, MVP find immobox, but when i try to adapt keys keep saying " please wait ..trying to comunicate.... " for long time and dont make anything.
What do you thing aboat this?

BR

Jose

you dont need to adapt any keys, I wrote your keys into the dump, you just need to learn ecu.

ninja

[Jose19]

you dont need to adapt any keys, I wrote your keys into the dump, you just need to learn ecu.

ninja

Hi friend

The car is runnig now, your solution worked 100%..
My fault is i havent learn ecu.

Great job from you Ninja :top:

BR

Jose

[ninja123]

Glad to be of help mate, I had this same problem just last week, so all info was fresh in my mind!!

Nice to get a reply too!!

ninja

[Jose19]

Glad to be of help mate, I had this same problem just last week, so all info was fresh in my mind!!

Nice to get a reply too!!

ninja

Many Thanks Friend

BR

Jose

[Gery]

Aveo ECU teaching enough to dump the flash, or should Tech2?
This is similar to the ecu renault sirius32

[VDO]

I have same problem with 1.4 delco ecu try to tech ecu with mvp but with no success is there some other solution to propose ?
Thx

[teuton]

I have same problem with 1.4 delco ecu try to tech ecu with mvp but with no success is there some other solution to propose ?
Thx


Did you write your keys into dump before you tried to teach ecu?

[keygargoil]

here is your file try this there is a new file also incase yours is bad

[VDO]

Did you write your keys into dump before you tried to teach ecu?
Yes I'm, I have only one key, in mvp menu sad that immobox is learned with the key

@keygargoil password my friend

[Gery]

aveo 1.4 delco can you immo off .

[marijuana]

I also have the same problem with aveo, but I wanted to download your files and secure? password?

[marijuana]

file.. for gargoil

[keygargoil]

send me your key data and il add it for you i think you just need yor key programming as there is no keys

[lurossi]

Hello, I have the same problem with aveo 2011, I have both keys and inmo flashes, here I send inmo file, can anyone help? delphi ecu 34 mt. thanks in advance.

[lurossi]

Hello , ninja123 , you can check my post and tell me which may be happening to you, thanks .

[seanortiz]

try this dump, then do learn procedure with mvp, then re fit obd plug cover before starting.

ninja

ninja123 (http://www.digital-kaos.co.uk/forums/member.php/187620-ninja123) please can you repair this immo box thank you my firend


chevrolet kalos 2006 427037

[Cesarec]

Hello, I need help with Chevrolet Aveo 2008. all keys lost. I try to add key with SBB but without success.
After that when I read dump from immo box I saw that all keys are erased.
ID from new transponder ID48 is 04 56 AB F5
Can somebody help me with this please?
Thanks in advanced!

[lion0304]

Hello, I need help with Chevrolet Aveo 2008. all keys lost. I try to add key with SBB but without success.
After that when I read dump from immo box I saw that all keys are erased.
ID from new transponder ID48 is 04 56 AB F5
Can somebody help me with this please?
Thanks in advanced!

Try this file, write as 16bits

[Cesarec]

Try this file, write as 16bits

Thanks, I will try and report.

[castin]

Try precode transponder (im use Tango) . Im not precode id48 and after write car dont start. After precode all ok.

[Cesarec]

Try this file, write as 16bits

Thanks to all. Problem solved.

[lion0304]

Try precode transponder (im use Tango) . Im not precode id48 and after write car dont start. After precode all ok.

ID48 need to be locked to start engine.

[Cesarec]

Try precode transponder (im use Tango) . Im not precode id48 and after write car dont start. After precode all ok.

Thanks mate, that was the problem. ID48 need to be precoded before learning key. I write back ori dump and add key by obd.

To lion0304:
"ID48 need to be locked to start engine"
ID48 must be unlocked before learning. I was trying to add transponder manually and locked it from dump but without success.

[lion0304]

Thanks mate, that was the problem. ID48 need to be precoded before learning key. I write back ori dump and add key by obd.

To lion0304:
"ID48 need to be locked to start engine"
ID48 must be unlocked before learning.I was trying to add transponder manually and locked it from dump but without success.

If you add transponder to dump by prorammer or manual, after added, transponder need to be locked.

And over obd, it need precode before.

[Cesarec]

If you add transponder to dump by prorammer or manual, after added, transponder need to be locked.

And over obd, it need precode before.

Yes that's right.

[JOSEPH1975]

Glad to be of help mate, I had this same problem just last week, so all info was fresh in my mind!!

Nice to get a reply too!!

ninja


Same problem... was useful dump from ninja 123 for learn somethink but it is password protected http://www.digital-kaos.co.uk/forums/images/smilies/frown.png Any help? my dump is ok but the zone about key is FF... sames that keys are been deleted

[mineli]

Hi, i have a chevrolet aveo 2007 wit a immo problem and i think is a bad dump fom RL56. Frst i tried with T300 and not work and second time with fvdi v2018 in KEY tool section but no success. Please help me with a good dump. key 1 : E1648337. KEY 2: B630E417. Thank you

[k_algulam]

hi sir
please i need help if you can
i have suzuki swift+ 2008 with immo i850 like chev aveo immo , maybe immo dump not good i hane sbb and gscan2 and mpv pro i can not re sycronic immo error connection this is immo dump please check it and repair i read it as aveo 93c56
with my best regards

[TOPITOAUDIOCAR]

CONTRASEÑA POR FAVOR ?

[Allky86]

hello ,i tray to add new key delete old (lost).aveo 1.2 my 2010.used blak id48 .read rl56(96c56) with programer. open dump over fvdi tah key tool and add new blank transponder. will car start ? the car is 50km from me .do i need to lock id48

[Kribs]

Hi guys I have a similar problem can t300 sync immo with ecu

[dragoshu]

Hello,
Can somnbody check my dump from aveo 2012,car it all key lost and I have try with autel OBD and damage the dump.I have remuve immo and read eeprom byt no programmer recognize dump.
Ill aporeciate the help.
Thanks