Siemens PPD 1.5

[levisdj]

Hello, I'm trying to get some information regarding a 07 VW Passat with a Siemens PPD 1.5 ECU.I have done a read with my MPPS 3.0 all ok.I wanna edit the file tomorrow and write in to the car...Has anyone got bad experience with this ECU? Troubles or something to watch out to?... waiting replyes, thank you.

[bmgadam]

Hello, I'm trying to get some information regarding a 07 VW Passat with a Siemens PPD 1.5 ECU.I have done a read with my MPPS 3.0 all ok.I wanna edit the file tomorrow and write in to the car...Has anyone got bad experience with this ECU? Troubles or something to watch out to?... waiting replyes, thank you.

MPPS doesn't calculate checksum for PPD :)

[levisdj]

Titanium does calculate checksum.I wanna know in the writing process if someone had failure or stuff like that!

[kennfeld]

Titanium does calculate checksum.I wanna know in the writing process if someone had failure or stuff like that!


you say to be "Car software engineer developer!"
you use ECM LOL
and you use MPPS (called also the serial ecu killer)

ROFL !

[levisdj]

very funny (NOT) I asked an oppinion, not someone to make a list of what I use.

[wiseman]

MPPS 3.0? Where the hell u been for 2 years? Use a decent tool for a start

[kennfeld]

the problem is with old tools like that you can not work securely i restore several ecu's in the day because people think they can use clone and in stead of tuning what's my job i repair ecu's ...

for the 1.5 it's possible to have full description for winols 2.39

[mishu_b]

Hello, I'm trying to get some information regarding a 07 VW Passat with a Siemens PPD 1.5 ECU.I have done a read with my MPPS 3.0 all ok.I wanna edit the file tomorrow and write in to the car...Has anyone got bad experience with this ECU? Troubles or something to watch out to?... waiting replyes, thank you.


as far asI know - MPPS cann't write PPD 1.5

please let us know the results

[taurius]

I have written a ppd 1.5 with mpps v5 :)

[gad3n]

i have written siemens PPD 1.5 several times with v3 and v12 ... works fine .. just 1 time write fail but recovery works flawless ;)

[mishu_b]

guys - here it is about PPD 1.5 not 1.1, 1.2, 1.3!

for those which posted that the MPPS worked with PPD1.5 could you please post here print screens picture with working tool?

thanks

[taurius]

I have written a partitucal VW Passat with MPPS V5 about 5 times, don't have the picture, but have the original file.

The HW number was:
03G906018CD

You can google it, it is a ppd 1.5 :)

[mislav88]

i have also done many PPD1.5 ecus with euro v12 clone, sometimes failed in writing but always recovered it obd without problems

[gad3n]

ops my bad this was screen from ppd 1.3 :(

[levisdj]

The read went just fine... so should I give it a try with mpps 3?

[mishu_b]

I have written a partitucal VW Passat with MPPS V5 about 5 times, don't have the picture, but have the original file.

The HW number was:
03G906018CD

You can google it, it is a ppd 1.5 :)

the read is fine with MPPS for PPD 1.5 the write is the issue!

for the initiator - you can try to write - let us know the results!

[taurius]

the read is fine with MPPS for PPD 1.5 the write is the issue!

for the initiator - you can try to write - let us know the results!

Wrote it about 5 times, the car didn't react well to tuning :(

It had a very strange issue - once you put pedal to 100% it went very good, but if you pushed 50% - it started jerking/cutting fuel from 2000 to 2500rpm, as if the engine was cutting off injection for half a second. I did try normal approach, torque conversion cheating, duration cheating - problem was always the same. Now it's running on the original. Anyway - did about 5-6 writes without any problem.

[pablo1971]

i tried to read vw passat 06 ppd 1.5 with mpps v12...got id...but no read at all...used fgtech2 to do a read.

I may be wrong....but im sure mppsv12 dont do this ecu.

[jaxone]

guys - here it is about PPD 1.5 not 1.1, 1.2, 1.3!

for those which posted that the MPPS worked with PPD1.5 could you please post here print screens picture with working tool?

thanks


Mishu ...
Here is my brother's ECU data :
Part No SW: 03G 906 018 CE HW: 03G 906 018 CE
Component: R4 2.0l PPD1.5 G 9384
Revision: --H25--- Serial number: VWZCZ000000000
Coding: 0000078
Shop #: WSC 66565 257 00032

I wrote and RE WROTE this ecu at least 25 Times with MPPS !
Works flawlessly.

[levisdj]

@ jaxone : what version of MPPS ?

[jaxone]

Think is 5.0 , black simple cable.