tuner configuration error after flash

[dega84]

Hi guys

Could someone please help, i recently upgraded my Dreambox DM800 up to Dream Elite V3.0 and bootloader 84b, but didnt backup my original setting and now i cant received any satellite on my motorized dish as its stating there a tuner configuration error........could someone help me to get my system restored please

thanks
Dega

[firestorm]

Have you tried
menu---setup---service searching---tunner configuration---tuner A(what ever shows)---configuration mode> (set to advanced)---pick what sat you want---
on diseqc mode >select 1.2
scroll down and add your long and lat(get them from dishpionter.com)
then set ---use usals for this sat
ok
then repeat for all the sat you need

[dega84]

thanks for reply, yeah i had a go at it but didnt really know what i was doing, and now i think ive buggered it even more, my booting screen has now stuck on Barryallen and wont boot pass this stage, stays on "barryallen is working" then sysytem restarts and does same over again +++ any ideas on how to solve this?

thanks again

[00360362878]

remove the usb stick and it should then boot to the image in flash memory.

[nush]

or if you are using a n installed channel list

menu---setup---service searching---tunner configuration---tuner A(what ever shows)---configuration mode>simple
then mode..................positioner

then set longitude and latitude, press ok job done

[dega84]

thankyou very much for the info on rebooting without my HDD io have now disconnected and rebooted ok :) but a question to go along with that........can i reconnect my HDD at any stage in furture or will i go back to the freezed reboot stage every time i connect my HDD,

Now that i have it up and running it still is coming up tuner configuration error, tho im not 100% sure on the dish its def not pointing at correct position and i have went on to dish pointer typed in my post code and typed in my
Latitude:
Longitude:
but in setting of my decimals are set up different like for long its 005.100 and lat is 050.767 so my question would be how does that correspond to the ones i got of dishpointer? sorry i maybe sound silly but would be so grateful if you could help me on this issue, and why its coming up? have i typed in the right long and lat?

[00360362878]

You need to format the HDD to ex3 do it using ubuntu, you can download it to Disk then boot your laptop/desktop via the disc drive.

If that is your long lat enter it as:-
lat ***.*** and the 5 if you can
long ***.*** and the 1 if you can
doesn't matter to much about the last numbers mate

Good luck

[dega84]

thankyou finally have it sorted, could u kindly edit those lon/lat please as never thought when typing it ;)

as for formatting disk ill have to get a mate that knows about that type of stuff, known me id wipe the laptop as well lol, but if it was simple enuff id appriecate anyone giving me instructions on how to do it, main thing is the connections are different and means id have to open up laptop to connect HDD??? Or can i connect it via connections on laptop without opening it up??

thanks again guys really appriecate your help in getting me up and going again

Dega