Codiprog or Smok eraser

[pepi]

I need some feedback for good eraser/programming on board of m35080x, D80D0WQ, D160D0WQ.
Codiprog or Smok eraser?

[markony79]

bouth tool come from "same" company

I found this last mounths...smok work before for elprosys....but maybe still compare job

smok--I dont have for this job,
but elprosys codiprog , i have...and soon come for last CAS4 5M48H...now its in the test

[markony79]

but if you need only erraser...the best is RepSoft LTD - Tacho - Tachoreparatur - Chip-Tuning (http://www.tacho.de/cgi-bin/seiten/index.pl?spr=2)

[yugo45]

SMOK tool is good but can not do in circuit, you have to desolder chip.For the price he is selling it , it is very good tool.

Codirog can do in circuit.

[rukartinatv]

but if you need only erraser...the best is RepSoft LTD - Tacho - Tachoreparatur - Chip-Tuning (http://www.tacho.de/cgi-bin/seiten/index.pl?spr=2)

yes its the best erazer and programer.
i have for 7 monhts work 100% on bmw
all job 5 cek.
Rangerover m35080v? dont eraze on the board
say no conection only work if you desolder eprom.
But i use both of them Codiprog and erazer.
but its not only erazer its erazer and programer.
You just read put new km and its eraze automatic.

[nebojsapejcic]

but if you need only erraser...the best is RepSoft LTD - Tacho - Tachoreparatur - Chip-Tuning (http://www.tacho.de/cgi-bin/seiten/index.pl?spr=2)

Repsoft promised that they will make special sd card for this eraser, so we can save more backup and transfer files. Also they say it will have more update in a future, is this true?
It' supposed to come already but maybe they gave up?

[markony79]

Hi
I dont have this tool, but my dealer have it
if i remeber can save max 200 dumps

I found only here.....
Chip-Eraser& Repsoft Eraser f?r BMW und OPEL - YouTube

but can put SOIC clips for chips directly, no need to remove from pc board

[nebojsapejcic]

I got one it works very fast , not every time in circuit. Problem is that you can only save 1 file , then change it . If you make a mistake you can load this file back.... but that's it . You can't transfer file or edit and after you do another car that file is gone.
There is a place for sd card, supposed to be special card for it, regular sd card doesn't work.
Can you ask your dealer if he knows somerhing about it.
Also this toll will have a lot more functions in future.

[antibisic]

SMOK tool is good but can not do in circuit, you have to desolder chip.For the price he is selling it , it is very good tool.

Codirog can do in circuit.

I asked Smok before and he told me that his eraser work in circuit

[TULGEYWOODMAN]

I got one it works very fast , not every time in circuit. Problem is that you can only save 1 file , then change it . If you make a mistake you can load this file back.... but that's it . You can't transfer file or edit and after you do another car that file is gone.
There is a place for sd card, supposed to be special card for it, regular sd card doesn't work.
Can you ask your dealer if he knows somerhing about it.
Also this toll will have a lot more functions in future.

So its not possible to save the file for future reference? [without first backing it up via upa .etc]

[nebojsapejcic]

Correct. I save first with dp3 and than takes 5 sec with this eraser to change. Hopefully they make this card to save and transfer files

[TULGEYWOODMAN]

It needs a proper hinged zif socket instead of the mickey mouse one.

[yugo45]

I think 499 ? is little to much for this tool, no matter how good is.

[yugo45]

I asked Smok before and he told me that his eraser work in circuit
Nope , I have one.
But I do not really care. It takes 3 min to get chip in and out.
For 160 ? it is very good tool.

[rukartinatv]

Nope , I have one.
But I do not really care. It takes 3 min to get chip in and out.
For 160 ? it is very good tool.

you have to get codiprog and erazer.
Codiprog work much better

[tavicu21]

hy
i have erasser m35080,work great and safe

100% ok
regards

[Safety]

smok is good

[markony79]

Codiprog is now 99eu

Skickat fr?n min E5823 via Tapatalk

[super jumbe]

smok is good

I can not understand why people want to spend over 300 euro to buy tools when a simple UPA-USB software can erase M35080 chip in few seconds… http://www.digital-kaos.co.uk/forums/images/smilies/hmmmm2.gif

[nebojsapejcic]

Ok so I try to ordered 99usd codiprog and look how much is total :).....and there is no other shipping option !

[markony79]

348662348663

Skickat fr?n min E5823 via Tapatalk

[markony79]

I order 3 pc

Skickat fr?n min E5823 via Tapatalk

[markony79]

Totalt 365eu with 2 cables

Skickat fr?n min E5823 via Tapatalk

[markony79]

here is

http://shop.diagprog.com/product-eng-34-CodiprogUSB-MK2.html

[cokolo]

I can not understand why people want to spend over 300 euro to buy tools when a simple UPA-USB software can erase M35080 chip in few seconds…:hmmmm2:

UPA has never been able to erase 35080 eproms or 080DWQ even new UPA-S .

[claudio35]

Now price is 99 euros

[super jumbe]

UPA has never been able to erase 35080 eproms or 080DWQ even new UPA-S .

When ever I tried to give free information there are always lads who are hear for nothing but agro only, have you ever consider trying it your self before making comment?.
1. open UPA-USB programme
2. open M35080 folder
3. mount the M35080 chip on the programmer
4. click Erase All
5. DONE.

[cokolo]

I try several times but UPA cant erase 35080 !!!

[AVDIMON]

I agree, UPA cannot erase 35080VP

[honingkoning]

How good is codiprog in circuit with 35080 eep (especially erase)

[bodzio012]

Upa erase but only some of them, 100% 35080 6

[cristofir]

I just bought the new codiprog mk2 and can't install.First Codiprog MK2 software has no Drivers for STM.Anyway when I connect the codiprog windows supose to detect STM32 but it doesn't.So is not installing.I was going to use drivrs from version mk1.
Also I see a strap between pin 15 and 16 on STM32 cip,is that correct or mabe that's the problem?
I am asking you because I have no support from ElproSys.They keep telling me to folow the video tutorial wich is only refering to codiprog MK1 for install.
Best regards!
Marian