View Full Version : LAND CRUISER PRADO 2002 ADD KEY
mvtamele
14th February, 2013, 09:14 AM
hi masters how to add a 2cond key in a lc prado 2002 year with 4d key
i got SBB, T300 ZED BULL clone with SIERRA SOFT
gwee
14th February, 2013, 12:16 PM
What transponder you use?
mvtamele
15th February, 2013, 09:23 AM
What transponder you use?
i am neww to this what transponder did you sugests me and where to buy
MonSter911
15th February, 2013, 01:37 PM
are you sure vehicle does not use 4C chip ? if not then sbb and t300 should work fine with 4d67.
felix17popa
15th February, 2013, 05:17 PM
2002 if is from japan must be 4c, if is from europe can be 4d
mburu
15th February, 2013, 06:03 PM
hi masters how to add a 2cond key in a lc prado 2002 year with 4d key
i got SBB, T300 ZED BULL clone with SIERRA SOFT
POST CHASSIS BRO .............
rashid01
15th February, 2013, 09:14 PM
hi masters how to add a 2cond key in a lc prado 2002 year with 4d key
i got SBB, T300 ZED BULL clone with SIERRA SOFT
if 4d read and write zed bull SIERRA SOFT in tpx2
rashid01
15th February, 2013, 09:17 PM
other u can rest immo via red obd 4d key programmer
keygargoil
15th February, 2013, 10:26 PM
2002 will be 4c is this one of your first immo jobs petrol is ecu and diesel immo box
MonSter911
16th February, 2013, 07:20 AM
if key is 4c you can manually add by procedure provided you have a registered master key.
-insert master key into ignition and turn on.
-press and release accelerator pedal 5 times
-within 20 secs press and release brake pedal 6 times.
- remove key from iginition, insert key to be programmed into ignition switch but do not turn ignition on.
- within 10 secs press and release accelerator once.
- wait 1 mintue security light will extinguish.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.