PDA

View Full Version : 1AP41 saxo 16v


scarymistake
14th February, 2013, 12:56 PM
I might have a stupid question
I have the original dump extract from the chip
And i have the file from a Saxo 16v Challenge
The original ecu is a 1AP41
The Challenge ecu is a 1AS

Now the question can i put in the file from the Challenge ecu in the 1AP41 ecu ???

Thanks
scary
rabie_m
14th February, 2013, 01:18 PM
IS SAM HARDWARE ORE NOTE,,,,???
scarymistake
14th February, 2013, 01:31 PM
IS SAM HARDWARE ORE NOTE,,,,???
HHHmm Yes
But the org is 1AP41 and the Challenge a 1AS
Connector is the same
Engine almost the same (cam exhaust injectors etc. are div-rent)
jnoroeste
16th February, 2013, 01:49 AM
Hi M8,

I'm not sure, should check map adresses for coherences between files.

Regards.
bobolin4o
16th February, 2013, 12:21 PM
I might have a stupid question
I have the original dump extract from the chip
And i have the file from a Saxo 16v Challenge
The original ecu is a 1AP41
The Challenge ecu is a 1AS

Now the question can i put in the file from the Challenge ecu in the 1AP41 ecu ???

Thanks
scary
I think, that there is not problem with swapping the chips. In fact, the processor boot from this chip!
If the main board, wiring, actuators, sensors, power, etc. is the same, then go ahead!
Regards!
nick_f
16th February, 2013, 12:25 PM
I might have a stupid question
I have the original dump extract from the chip
And i have the file from a Saxo 16v Challenge
The original ecu is a 1AP41
The Challenge ecu is a 1AS

Now the question can i put in the file from the Challenge ecu in the 1AP41 ecu ???

Thanks
scary


scary I've tried a file from 1AS ecu and does not work in 1AP41 ecu.i have this file "Challenge",and is quite different.
scarymistake
16th February, 2013, 12:45 PM
scary I've tried a file from 1AS ecu and does not work in 1AP41 ecu.i have this file "Challenge",and is quite different.1AS is a GroupA ecu.
do you have a working file to the 1AP41 ???


thanks
nick_f
16th February, 2013, 01:20 PM
do you have a working file to the 1AP41 ???


thanks


Scary i have many working file to the 1AP41.what use for?
scarymistake
16th February, 2013, 01:27 PM
Scary i have many working file to the 1AP41.what use for?
somting like GroupA ???
gezame
16th February, 2013, 03:56 PM
Hi
To do a good file, it is necessary to know the mechanical modifications made ***8203;***8203;in the car ....
Injectors, ? camshafts, bars pressure regulator,etc.
Br.
mexanico1971
16th February, 2013, 04:15 PM
sorry to spawn !
saxo Challenge is a race "trofy" or is version of saxo ?!
like "saxo cup "

br
Carladislav
14th February, 2018, 05:23 PM
Plese,can you password send?
arladisla