DPF and Lambda Remove tests

[blackpirate]

yo guys
http://oi46.tinypic.com/30kpxfd.jpg
testers needes to this softwares!
Please post some files to test!
my guess its that software are crap!!!

P.S: DO NOT USE FILES ON CARS! MIGHT KILL IT!

so preferably experienced tunners to test files!!

Thank you

[assitutto]

A5 3.0tdi edc17cp04
i defap this car today

mod this file if you want and i check that work

[blackpirate]

A5 3.0tdi edc17cp04
i defap this car today

mod this file if you want and i check that work
sw supports only cp14
gives error on your file!(and send mail to authors)

thnx! u have any other file?

[assitutto]

i'm full of file
this is audi a4 2.0tdi cp14

[blackpirate]

Map1 has been disabled
Map2 has been disabled
Map3 has been disabled
Map4 has been disabled
Map5 has been disabled

can you check?

thnx

[assitutto]

file is not good.
sw starts to change addresses too early

[assitutto]

you want other file for test?
what ecu file you need?

[blackpirate]

file is not good.
sw starts to change addresses too early

but changes are good???????

even if it starts ealier!? changes are ok??


look on image! and if you have files that are supported pls send!

lambda files also ok to send!

thank you

[imcumen]

audiA4 edc16U31

[assitutto]

but changes are good???????

even if it starts ealier!? changes are ok??


yes, change are ok

upload edc16c39 alfa, edc16c34 ford and 500 1.3mjet fiat

[blackpirate]

audiA4 edc16U31


pls look carefully on image and see supported files!!!

[blackpirate]

EDC16C39 (JTDA) (2MB) Detected OK.
--------------------------------------------------
12 Maps are detected and modified.

fiat not supported! pls see again if values are ok but on wrong addreses! if same its crack fault!!!!

thank you very much

[assitutto]

edc16cp3 audi don't exist
audi have edc16u31 and edc16u34 and edc16cp34

[blackpirate]

edc16cp3 audi don't exist
audi have edc16u31 and edc16u34 and edc16cp34

on sw cp3/34

:)

[Meat-Head]

why remove lambarda it helps the fuel mixture be correct

you will either wear out engine or use lots more fuel.

[assitutto]

edc16c39 alfa totally wrong. sw don't touch any dpf map, sw decrease all map for tuning like driver wish, torque, turbo,rail,ecc ecc

edc16c34 ford not good. wrong adress, start too eraly and not complete dpf off mod

[assitutto]

edc16cp34 audi and 1.3mjet opel

PS: i don't have lambda file to test, sorry

[blackpirate]

[QUOTE=Meat-Head;1874480]why remove lambarda it helps the fuel mixture be correct

you will either wear out engine or use lots more fuel.[/QUOTE

nice to see you Meaty!;)

hope u r cool and all the best for you!!!!

[wiseman]

why remove lambarda it helps the fuel mixture be correct

you will either wear out engine or use lots more fuel.

For removing the post cat lambda if you have stainless system fitted with no cat in it. If you take cat out in car leave sensor fitted mil light comes on

[blackpirate]

edc16cp34 audi and 1.3mjet opel

PS: i don't have lambda file to test, sorry


on both file say unknown format or etc etc! even if renamed them to .bin
they dont load!!!

thnx for testing!


btw
on edc16c34 ford not good. wrong adress but ok changes????????

[assitutto]

not complete change
sw increase torque limiter and stop. it don't touch dpf off switch, so solution not good

[blackpirate]

i go 2 sleep! pls post more files if you got others supported by this sw! i do in the morning so you can review! so, still , in resume even its its a crack fault the thing with wrong addresses but ok fixes , the software its crap!!!!

P.s: im not doing negative advertising!!!
this a just facts!

if anybody got original pls post files done with org also! thank you very much for your time!!

[soundnavigator]

I can attach and test file from 307 1.6 16V for CAT remove.

Best regards.

[blackpirate]

I can attach and test file from 307 1.6 16V for CAT remove.

Best regards.
1037374326_ori_ME_7_4_4_PSA.bin
ME7.4.4 Detected OK.
Lambda1 not found or unsupported file!
Please send to us testing the file...


****, i wonder if they charge moneys on files that should already work and you paied for it!!!

[assitutto]

i think this is shitty software :D

bmw x3 2.0d edc16c35 and iveco edc16c39

[blackpirate]

bmw file not supported!
iveco
DAILY.bin
Map1 has been disabled
Map2 has been disabled
Map3 has been disabled
Map4 has been disabled
Map5 has been disabled
Map6 has been disabled
Map7 has been disabled
Map8 has been disabled

thank u

[mexanico1971]

do you want to tyr in this file !
BR

[assitutto]

bmw file not supported!
iveco
DAILY.bin
Map1 has been disabled
Map2 has been disabled
Map3 has been disabled
Map4 has been disabled
Map5 has been disabled
Map6 has been disabled
Map7 has been disabled
Map8 has been disabled

thank u

as always, sw mod wrong adresses and not correct dpf off because it don't mod DPF Switch

[Preliator]

Every lamer (so called some crackers) can understand this, software using same protection like EGR Remover software. If you don't using original software, your file will be patched to wrong adresses. So, crap not software. Here are crap unbrain (only loader, ollydebug script user lamers) :)

I have lambda software and my testing files working good. Also i have sharing here some resulting files (all is confirmed by DK users, you can look my old messages).

I don't buy DPF software yet (no money :( ) But my friends using and i don't hear any problem.

Finally,, i think another bad (crap) cracking story here.... :)

[mexanico1971]

Every lamer (so called some crackers) can understand this, software using same protection like EGR Remover software. If you don't using original software, your file will be patched to wrong adresses. So, crap not software. Here are crap unbrain (only loader, ollydebug script user lamers) :)

I have lambda software and my testing files working good. Also i have sharing here some resulting files (all is confirmed by DK users, you can look my old messages).

I don't buy DPF software yet (no money :( ) But my friends using and i don't hear any problem.

Finally,, i think another bad (crap) cracking story here.... :)


yes! here we can help etch other to make the work we need
but if we joint to by one subscription of a working software ?!

BR

[blackpirate]

Every lamer (so called some crackers) can understand this, software using same protection like EGR Remover software. If you don't using original software, your file will be patched to wrong adresses. So, crap not software. Here are crap unbrain (only loader, ollydebug script user lamers) :)

I have lambda software and my testing files working good. Also i have sharing here some resulting files (all is confirmed by DK users, you can look my old messages).

I don't buy DPF software yet (no money :( ) But my friends using and i don't hear any problem.

Finally,, i think another bad (crap) cracking story here.... :)


mate, take it easy! before makeing someone idiot , look at what i said and what this thread its all about!!!!

thats i was trying to find out, crack problem or original!

on some files patched wrong addreses with good changes!- bad crack


but what about doing just craps on file? that from crack also??

if you have origininal post lmbda file org and done with your org sw, i post with cracked and see if are identical! that will be helpfull!
thank you very much

[Preliator]

mate, take it easy! before makeing someone idiot , look at what i said and what this thread its all about!!!!

Thread about, bad crack and blamed to software + developer. Sorry but least for me, this not justice. Here are peoples think software bad(?). But software working and license passing don't enough for full (original) working. Developer making more protections for against pirate using. I was talking this before with asc guys.

Of course, we can try here test files. Nobody against this. But if you write here " software bad, can damaged your ecu's" with bad crack software, this not justice.

(I was tested Alwarez's EGR shared crap and differents was big. Original software and loader version really different working. This are security and normal.)

First you must show to me your testing software original or loader version. If you testing with loader version, test result always unsafe. You can't blame software or developer because firstly your crack is bad. We was see this before EGR remover subject. I'm still using EGR Remover v1.52 and my %90 files working perfectly on cars.

Other side, of course some peoples wanted to sell every peoples EGR + DPF manuel (one) files. Like these softwares making to all automatical. I understand these business peoples problems with ready softwares ;) 1 file 100 usd or 150 usd. But software just 350 usd. Easy to understand some things.

Nice Days,

[blackpirate]

lets do it crystal clear!
on first post i said people post files and i solve with cracked! on the thing: not put on car, i was telling that cracked sw result not ok and might kill ecu!!!

and i was not tellg full sw its crap!! i said my guess!
guees means unsure!!!!

so, post a file done with org and 100% that work on car(tested), i try with cracked and see results!!!

[Meat-Head]

For removing the post cat lambda if you have stainless system fitted with no cat in it. If you take cat out in car leave sensor fitted mil light comes on


ON AND OFF TOPIC:-

P0420 - cat below effiecency

1) Easy way to to search Emerican sites for "sparkplug extenders"
a bit of tube with thread at each end, spaces sparkplug away from combustion chamber - stops engine burning oil??!!?? Insert one of these after the cat - screw lamdba into it

2) TYpe in google 'Emerican ford mustang sad owners club mil elimnator"

you will find a capacitor and resistor wired into the second sensor to fool the system - any cat/car

MUCH better than programming it out.

[diga1]

ON AND OFF TOPIC:-

P0420 - cat below effiecency

1) Easy way to to search Emerican sites for "sparkplug extenders"
a bit of tube with thread at each end, spaces sparkplug away from combustion chamber - stops engine burning oil??!!?? Insert one of these after the cat - screw lamdba into it

2) TYpe in google 'Emerican ford mustang sad owners club mil elimnator"

you will find a capacitor and resistor wired into the second sensor to fool the system - any cat/car

MUCH better than programming it out.
meaty tell us more about rear o2 sensors emulators.
do you have any diagram for it, exactly how to wire it

[tunermax]

hi
i have the following Mercedes sprinter edc 16
please need speed limiter and DPF and do I have to remove the error after that

[Nio]

Hello BP, post software you think not good and i'll test it for you. Regards.

[8k65m]

"... more about rear o2 sensors emulators."
Something like that.
Regards.

[eurouser]

"... more about rear o2 sensors emulators."
Something like that.
Regards.
It work but not for all engines

[blackpirate]

Guys, who has original sw post a file done on it and you tested on car and worked!!!!!!!!!!

thank you

[blackpirate]

nobody???????

:(

[cosmind]

hello BP, can you remove lambda from golf5 1.6fsi MED9.5.10, please

[rtr989]

citroen c4 2009
Bosch 0 261 S05 626
96 669 342 80
MEV17.4

try to remove post cat lambda.

[Stanton]

Im assuming post cat lamda is what's being played with here.

[rtr989]

Im assuming post cat lamda is what's being played with here.

Of course...

[zagyassin]

Citroen C4 need lambda remove
ecu magneti marelli iaw

9653979480

9659099180

[mexanico1971]

BP !
does the project stop ?!

BR

[Meat-Head]

WHY remove a lambarda sensor? they help with strominmetric ratio 14.7:1

type in goodgle mil elimnator capacitor and resistor

[morgano]

@meaty

The trick here is remove the second lambda sensor, that if i understood well is only to check catalyst health. Removing it allows you to remove catalyst too, and also not have to change it every 120.000 km.

[nadirayyildiz]

hi w209 clk320 0261 207 781 29f400bb orj.rar (about:blank) lambda remove

[m1t1k1]

hello, Software interface works with what ???

[eprst]

Hello, please help Lambda off, Ford focus2 1.6 benz, SIM-29, 7M51-12A650-HA
Thanks
Regards