PDA

View Full Version : Damos/A2l for BMW 330D E91 EDC16CP35/DDE6.0



michi84
17th February, 2013, 01:46 AM
I got the following informations from MPPS:


Bmw Ecu Type : BOSCH EDC16CP35/C (BMW)
Bmw Hardware ID : 07803369
Bmw Software ID : 07793496
Bosch Hardware Number : 0281012707
Bosch Software Number : 1037381343
Programming Date : 31.10.2005
BMW Kline Fast Mode

I need a full a2l for this car! I will pay for it!

666_devil
17th February, 2013, 05:06 AM
VIN Number : WBAVD91010XXXXXXX
Bmw Ecu Type : BOSCH EDC16CP35/C (BMW)
Bmw Hardware ID : 07803369
Bmw Software ID : 07793496
Bosch Hardware Number : 0281012707
Bosch Software Number : 1037381343
Programming Date : 18.10.2005
BMW Kline Fast Mode

Me 2, I have the same car, need the same thing.

moonlite
19th February, 2013, 12:44 AM
I have for edc15 and for 2005 330d I think that might be same ECU?

rabie_m
19th February, 2013, 12:47 AM
pm my.......

furnata
20th February, 2013, 11:18 AM
Try this all i have for 3.0D DDE6

michi84
20th February, 2013, 06:41 PM
This one I have too. Unfortunately it doesn't fit.. thanks anyway...

Gesendet von meinem GT-N7100 mit Tapatalk 2

furnata
21st February, 2013, 05:27 PM
Try this - i just open it 0281012707 sw 376969
open file and import a2l file- will work

michi84
21st February, 2013, 07:15 PM
Try this - i just open it 0281012707 sw 376969
open file and import a2l file- will work

Thank you! But this file is different soft version. Anyway it'll work when I can reflash my car with this version. Do you have a full BDM readout with eeprom and code?

furnata
21st February, 2013, 09:43 PM
Yes i have full backup but if you write just flash im sure it will work for you. It is same ECU. I test this before.

michi84
21st February, 2013, 10:06 PM
Yes i have full backup but if you write just flash im sure it will work for you. It is same ECU. I test this before.

But only if soft version is the same. Please upload full BDM! Otherwise it doesn't fit.

furnata
21st February, 2013, 10:13 PM
I will but tommorow morning im not in office now

michi84
21st February, 2013, 10:15 PM
I will but tommorow morning im not in office now
Thank you very much!

furnata
22nd February, 2013, 10:40 AM
Here mate full backup and separate too- flash i post up

michi84
22nd February, 2013, 08:42 PM
Here mate full backup and separate too- flash i post up

Thank you so much!
Now I have to wait for the BDM /Galletto I ordered.

michi84
27th February, 2013, 11:09 PM
Here mate full backup and separate too- flash i post up

I just tried flash with Galletto 2 over OBD. But it didn't work. Flashing was successfull but the ecu was not working properly...
Then I tried to open full BDM read with Galletto 2, but I can't open or flash it. Seems to be from a different BDM tool, isn't it?

furnata
28th February, 2013, 09:45 AM
I use CMD BDM100 clone for this

michi84
28th February, 2013, 11:15 AM
Do you know if it is possible to convert the files from cmd to galletto?

Gesendet von meinem GT-N7100 mit Tapatalk 2

furnata
28th February, 2013, 11:23 AM
You'll need to write with CMD if you want to put my data in your car.. Galeto can't flash eeprom and mpc
Or explaine what you wanna do ??

assitutto
28th February, 2013, 11:44 AM
galletto v2 can write your data with BDM, no problem :)

michi84
28th February, 2013, 12:38 PM
You'll need to write with CMD if you want to put my data in your car.. Galeto can't flash eeprom and mpc
Or explaine what you wanna do ??

Exactly. I want to flash the complete bdm read to my ecu and then replace the eeprom with my old one.
I tried it with fgtech galletto 2 bdm but I can't read your file.
I don't want to buy an additional bdm. So I hope to find a converter from cmd bdm to galletto bdm...

Gesendet von meinem GT-N7100 mit Tapatalk 2

Baddog84
28th February, 2013, 02:02 PM
Here you are

michi84
28th February, 2013, 05:39 PM
Here you are
Thank you very much. But unfortunately it is not working properly....



tried to write MPC: WRITING ECU
Writing Initilization...OK
reading error or wrong file dimension
tried to write flash: works ok but takes about 10 minutes...
tried to write eeprom: works


EDIT. Tried to write ori MPC again and it also didn't work.. Seems like my Galletto BDM tool/soft is the problem..

michi84
23rd March, 2013, 06:44 PM
I just flashed the ECU with WinKFP to newest version. I hope that the a2l for dde6.2 which is floating around will fit now...

VIN Number : WBAVU91010KT0****
Bmw Ecu Type : BOSCH EDC16CP35/C (BMW)
Bmw Hardware ID : 07808222
Bmw Software ID : 07793496
Bosch Hardware Number : 0281012707
Bosch Software Number : 1037387658
Programming Date : 31.10.2005
BMW Kline Fast Mode

michi84
24th March, 2013, 08:50 PM
Try this - i just open it 0281012707 sw 376969
open file and import a2l file- will work

Unfortunately the a2l doesn't fit to the flash readout....