Skybox F5 Mismatch OFF!!

[tayta]

Guys

I've downloaded the latest F5 firmware from the cc site, and via USB I get a file mismatch error.

So I looked into it and read that it can be when a firmware has been loaded that does not allow for USB updating etc, and you should use serial.

I downloaded and tried the LAN update first. I connected fine, it uploaded the fw...then the same, file mismatch error.

I have now downloaded the RS232 tools and am trying to upload the new fw but it wont work for me. All I ever get from the tool is "Synchronising STBs please reset target!".

I've reset and rebooted more than once and it goes no further. When I disconnect the cable after waiting way too long...the box reboots and carries on as normal.

Can anyone pleeeeeease suggest what i'm doing wrong and how I can update the FW on this thing? :hmmmm:

Cheers

[rrsmith21]

Hi Tayta Skybox F5

I dont know if this is any help but I had same issue. I downloaded latest firmware update from cc site and also from yojiatech but could not flash, always got (file mismatch error) no matter what I tried. I then found this site hddvbsw.c*m which had a different and older firmware upgrade 14/1/2013 also with a different string or code than the other two suppliers, but this flashed my box okay.
I really dont know why but suspect my box may be a clone?

[LeonRead]

Hi Tayta Skybox F5

I dont know if this is any help but I had same issue. I downloaded latest firmware update from cc site and also from yojiatech but could not flash, always got (file mismatch error) no matter what I tried. I then found this site hddvbsw.c*m which had a different and older firmware upgrade 14/1/2013 also with a different string or code than the other two suppliers, but this flashed my box okay.
I really dont know why but suspect my box may be a clone?
I am sure your box is CLONE .

[sb18180]

clone/faulty box if you update via rs232 it will put it into bootloop. the only firmware that will work on it is the one it come with SEND IT BACK

[rrsmith21]

I dont have any issues with my maybe cloned F5 box working okay, only thing is that I cannot install original firmware.
Last night I down loaded and installed latest firmware SKYBOX F5 _3601HD_CMT_130327.abs (8.4.2013) from HDDVBSW.C** and again upgraded okay, fixed Utube and channel scrambled etc.

[tayta]

I am sure your box is CLONE .Yeah it turned out to be. I've used the other updated firmware for my box from this........ :rulez:originally posted .......:rulez:

Just in case anyone was still struggling with this. :top:

[digicon]

Read the Forum Rules again Please: http://www.digital-kaos.co.uk/forums/f5/forum-rules-2/#post2: Do not post links to other forums with similar content

[Debiz77]

thank you sir