PDA

View Full Version : audi a6 2.5tdi need ori dump


wyckaz
17th February, 2013, 12:56 PM
Hi, have audi a6 2000. 2.5tdi 110kw engine code AKN with edc15 (29f400) and gearbox swapped from auto to manual, need dump from manual gearbox ecu.. thanks in advance
Maxomat
17th February, 2013, 04:28 PM
here you go...
wyckaz
17th February, 2013, 09:16 PM
wrong file mate..shoud be 512kb her's I think is from old ecu,with 2flash...I wrote need dump of 29f400..(AM29f400bt)
veloseeped
17th February, 2013, 10:13 PM
wrong file mate..shoud be 512kb her's I think is from old ecu,with 2flash...I wrote need dump of 29f400..(AM29f400bt)

No it was wrong request or car is "made in garage" ;-)
There isn't original ECUs for AKN type EDC15VM using 29F400 inside.
Only EDC15V with 2x27C010.
Better give ECU number using now (for AT) than will be easier to find an suitable dump replace for MT.
Also must know ABS type on the car - with or without ESP.
wyckaz
18th February, 2013, 08:05 AM
Original ECU numbers:
4B1 907 401 A
BOSCH: 0 281 010 095
:)
wyckaz
19th February, 2013, 02:21 PM
no one has that?
assitutto
19th February, 2013, 02:27 PM
what SW number?
i have this, regards
kennfeld
19th February, 2013, 03:56 PM
No it was wrong request or car is "made in garage" ;-)
There isn't original ECUs for AKN type EDC15VM using 29F400 inside.
Only EDC15V with 2x27C010.
Better give ECU number using now (for AT) than will be easier to find an suitable dump replace for MT.
Also must know ABS type on the car - with or without ESP.


My AKN is also 29F400 ....its 2003
the ecu that use 2 X 27C010 is a msa15 not a edc
tdigsi
20th February, 2013, 03:02 PM
no one has that?
why you can't change engine coding with vcds?
wyckaz
22nd February, 2013, 05:23 PM
mate have you ever tried on that ecu and such, car? I changed few passats ir audi with 1.9tdi engines without problems with vcds, but this one doesnt changes..
veloseeped
23rd February, 2013, 02:58 AM
My AKN is also 29F400 ....its 2003
the ecu that use 2 X 27C010 is a msa15 not a edc

Your car was rebuild in garage?
Last AKN engine inserted in Audi A6 in Ingolstadt factory was in 04/2001.
veloseeped
23rd February, 2013, 03:09 AM
mate have you ever tried on that ecu and such, car? I changed few passats ir audi with 1.9tdi engines without problems with vcds, but this one doesnt changes..

FYI, ECUs on 2.5 TDI 1999-2000 AKN/AKE can't be recoded from AT to MT and vice versa.
Your original 4B1907401A ECU must be programmed with 4B0907401AA dump to work with manual transmission, but...
... it can't be done because these two ECU have different hardware and plug connectors.

Add some pictures to explain difference
veloseeped
23rd February, 2013, 04:08 AM
the ecu that use 2 X 27C010 is a msa15 not a edc

VAG V6 2.5TDI VP engines use:
MSA15 use 2x27C512 eproms, Intel MCU
Than Bosch change main MCU to Siemens and set new row of ECU - EDC15 family.
EDC15 use Siemens C166 MCU, 2x27c010
EDC15V/VM/VM+ use Siemens C167 MCU, 29F400 flash