Galletto 2 EU Clone EDC17CP20 HW:H44 Problem

[leolux]

Hi Guys,


i have buy an edc17cp20 ECU to test the tricore routine bevor i want to read and flash real cars with my galletto EU clone. Galletto works perfect (kline edc16u1 and all other) but in this case i have a problem. The Prodecur looks very good all all alerts are fine and the galletto read the data with 100% massage on GUI out, but the read out data are verry crapy. At the beginning it looks like good but than there are only zeros. Perhaps anyone have make the same experience like me?

Yes bootpin are set, without them i become an error when i want read the ecu. I have test it many times, all steps the same crappy Data. I dont understand why perhaps the hardware revision is to new?

[filecloud]

Data is fine. You bought a virgin ecu!

[leolux]

Thanks my friend i have think the same but i never had bevor an edc17. Thanks verry much.

Leo

[leolux]

Hi,

have anyone the ori dump for my ECU?

VW: 03L907309K
Bosch: 0281016272

Leo

[mamanacusa]

Virgin ecu files are always handy, thanks for posting!

Good luck

[boradriver82]

Hi,

have anyone the ori dump for my ECU?

VW: 03L907309K
Bosch: 0281016272

Leo

Here I have a self read dump from 03L 907 309 K, Bosch Nr. 0 281 016 272, HW: 44, SW: 0050, EDC17CP20.
Read by optican and read by galletto.
Must be a virgin dump!

[chriskross]

Virgin ecu files are always handy, thanks for posting!

Good luck

how can it be flashed with correct flash file??

i have the same ecu is from T5 they are sold on eb...., but i think without online geko connection it is useless.

[leolux]

Here I have a self read dump from 03L 907 309 K, Bosch Nr. 0 281 016 272, HW: 44, SW: 0050, EDC17CP20.
Read by optican and read by galletto.
Must be a virgin dump!

Was your readed ecu a virgin too? Why all have this ecu in virgin state? Or is it perhaps realy a reading issue?

[masterb]

but see anyone any map for tuning ?

[boradriver82]

Was your readed ecu a virgin too? Why all have this ecu in virgin state? Or is it perhaps realy a reading issue?

I think the ebay seller can get the virgin ecus cheap

[chriskross]

here is the same thread from this ecu

http://www.digital-kaos.co.uk/forums/f173/t5-edc17-cp20-tuning-prot-313014/

[vic64it]

I have the same problem

[massi6]

hi read by galletto.

[chriskross]

i am trying now to flash this ecu but i got

after 3% OPT rewrite error!

i can't see any difference between my original and new one.

bad clone? can i do it with other tool?