PDA

View Full Version : DCM 3.4 from Renault Megane III 1.5dCi



LaraVAG
18th February, 2013, 10:46 PM
Anyone try to read this ECU by Piassini clone???

LaraVAG
19th February, 2013, 03:55 PM
Anyone?????

kennfeld
20th February, 2013, 02:02 PM
never done with piasini
i do cmdflash over obd

piasini you need to make solder wires in the ecu ...
and make bridges ...

LaraVAG
21st February, 2013, 02:49 PM
Everything work good:) Procesor sh7059, piassini read/write perfect, but slow.

furnata
24th February, 2013, 12:41 PM
Can you post pinout's connections ?
Thanks

LaraVAG
24th February, 2013, 02:05 PM
One use to connect only pinout to power +12V and GND (-), second one its from piassini to connect wire on board. From menu you must select SHXXXX ToolBox / ToolBox [9].

Catalin_TCM
26th March, 2013, 01:49 PM
I have the same car.. but at mine , pcb is diferent ... look at picture . I have read it - ok , but when i wanted to write the modified file , i didnt have where to do the bridge

luiggii79
28th March, 2016, 07:55 AM
I have the same car.. but at mine , pcb is diferent ... look at picture . I have read it - ok , but when i wanted to write the modified file , i didnt have where to do the bridge

solved for write problem on this ecu?. i have same problem wiht you ! please help me.

fuzeiro
5th September, 2017, 08:24 PM
[QUOTE = luiggii79; 2735693] resolvido por problema de escrita neste ecu ?. Eu tenho o mesmo problema com você! por favor me ajude. [/ QUOTE]


I also have the same problem how to solve?


thank you