kess v2 clone

[ovi730]

if someonw recived china 4.036 please fost FTDI , NXP and 24c34 near nxp on this way the china solution can de applied on a 3.099

[Chippy0815]

as i far as i know when you buy new kess clone in cn you won't get the new fw as bin file....only token reset soft. So this will only work with the tool you bought.

[ecutuners]

if someonw recived china 4.036 please fost FTDI , NXP and 24c34 near nxp on this way the china solution can de applied on a 3.099

Hahahahahahaha

[ovi730]

it is possibe via serial uart

[Chippy0815]

sure it is possible....the problem will be to get the bin file!

[ovi730]

attached solution for ktag. those procesors even are locked crp3 serial 0 is remaining opened. so the processor can be read or writed via flashmagic. the bootloader will be injected

ha ha ha ha ha - there are solutions my friend.

[Chippy0815]

like i said....sure it is possible, but you still need the fw :D and THIS is the point mate :)
You told us that you will make it public when you got it.

I'm very surprised!

[bondiblu]

attached solution for ktag. those procesors even are locked crp3 serial 0 is remaining opened. so the processor can be read or writed via flashmagic. the bootloader will be injected

ha ha ha ha ha - there are solutions my friend.

This is old unlocked firmware lol, CRP3 is disabled yes, even JLINK does this so what is special ???

[ovi730]

from nxp firmware can be extracted. 3.099 i succeed. what is no special al 4.036 ?

[Chippy0815]

you don't see my point. In 4.036 fw the only special is to get it :D

[ovi730]

now china will arrive only cars and bikes. why are you against us. if you have it and you not not want to share with us just read the thread but you have the right to remain sillent. let us - "the stupid ones" to live and try. i realy do not understant this aproach. are you upset that we share the small things and ideas here ( even the stupid ones) ?

[ovi730]

share with us. are you going to be reach if you just say - i have it???? how many updates you performed - i think now you have at meast a 2015- SL500 AMG from the money earned from those updates. :)
come one ??????? if you are seeing it as a buisness, some of us we saw it as a hobby !!!!!!!!!!!

[bondiblu]

from nxp firmware can be extracted. 3.099 i succeed. what is no special al 4.036 ?

Ok, try it for yourself, let us know how it goes ;)

[ovi730]

i did not get it yet. ordered via post:( thy it for your self ..... come one..........................

[morgano]

on lpc2478 if crp3 is active only way to erase mcu is IAP calls from inside the firmware, all external access is blocked, UART0 included.

[ovi730]

possible- i never saw 4.036

[Chippy0815]

@ovi730
you don't see my point. When you will get your new chinese clone, than you will know what i mean...and than you will understand all the problem :)
And maybe i am rich, but not with selling clones or updates...

But i think everybody can understand that nobody has something to give away for free.

Would you share goods for free you already payed more than 1000 of Euros?

[ovi730]

yes. i already do it. think about . you are sharing , another one is sharing something elese. in this case we just full fill the same pockets- no progress my friend :) Al it is about mentality. think only to yourself and you will have nothing to gain at the end. If you already cover your cost ant it is 100% probability - now it is all about profit , no ????? china is coming with the lowest price possible. already i thing that sellers feel it. At the end it is your decision !
Good luck in making money with this update.

[Chippy0815]

ok i can tell you how many money i already made with the updates. NOTHING!
You can believe it or leave it.

I can make public where i bought it. And you also can buy it there and share it for free. It is up to you!
http://www.diatronic.net/product_info.php/kess-v208-fw4036-firmware-upgrade-project-p-643

This is not wehter my website, nor i am the seller!
Just the place where i got mine.

So feel free to sahre with us for free @ovi

[ovi730]

you too my friend

[Shemek]

Chippy0815 if you have it from this website then you know what it is...one big sh...t

[Chippy0815]

maybe it is one big ****. But this big **** works great without any problem. And token reset isn't the problem too (the point you asking me for help xD)

[Shemek]

Yeap as you said it is not a big problem when you have a good tool/software to reset tokens..or you know someone who can do it...(I dont have one and that is why I asked you for help)but from driatronic you have one big sh...t regarding token resetting...

[Chippy0815]

it works without any problem. You have bought china tool and there you have problems with token reset and i offered my help (you don't wanted) (same problem ovi730 will have), but why say some method is not good you don'T have tested?!?
I don't understand.... :/

people asking me for help and if i want to help them they are starting fight here in forum?!?
so you also have v4.036 fw, you can share with ovi730

[gazvts]

Saying nothing of what you have is sometimes the only way
"closed mouths catches no flies" an unwanted attention

[niwat_spp]

Hi all my tool hardware china clone update from #ecutuners. all protocol active and can use same original tool no need close internet.

best regards

[teerak2uk]

Hi all my tool hardware china clone update from #ecutuners. all protocol active and can use same original tool no need close internet.

best regards
Screen shots!!!!!

ผมคิดว่า การโกหก ของคุณ

[Chippy0815]

i think it's same solution everybody offers at the moment? CP, tunertool etc....no need for screenshots, because nothing new....
(like on the link i have already postet)

[niwat_spp]

this post start by me.. all true from me. i not have anything sale in the DK. If not sure not post. If you see tokens reset software make by ecutuners and i try upgrage KTAG from car-prog all ok remark I have original tool and clone tool and VF2 for do toyota

stop talking if you not try.

thank

[niwat_spp]

clone tool have only firmware 4.036

new version original v5.002.

my clone tool after upgrade firmware 4.036 not v5.002

[Chippy0815]

and what is the information now for us?

You don't want to sell.....
you don't want to share...

so why posting? Only to say i have fw, but i don't want to sell and don't want to share?!?hm
....

[niwat_spp]

No chippy0815 i information all people. stop ask me for buy tool to my PM. Not sale.!!!!!!

If some people need i help can send me in PM if i can I will help

thank

[Chippy0815]

but i don't understand for whom this information is helpful when you
a) are not sell anything
b) not sharing anything

doesn't make sense?!?

How you will help other people? Telling you have a solution but not share and not sell?!?

[gazvts]

50euro ahead min 20 ppl ??? Lol god loves a try'er hehe thats it back in your pocket !!
btw just joking
But if 19 genuine trust worthy guys wanna do it stick me down for it

[Chippy0815]

@gazvts
ah ok now i see...niwat wants to cheat us...telling us he has nothing to sell, but want to sell the goods from the link i have posted :D

but it'S a good idea....and if finding 1000 Persons, who are willing to buy, it will take only 1 Euro xD

[gazvts]

................ ;)

[mauronow]

Niwatt ...you inbox is full.

[Chippy0815]

@gazvts
i think you got me wrong mate :D
solution is that cheap now....i think everybody can update now!

For me there is no reason to buy new china clone if the cost for update is nearly same.
And for china tool you have to wait some days...update you will get in few minutes.

So everybody should ask himself what will make more sense :)

or just wait some weeks for free solution!

[gazvts]

Maybe i did take you wrong way my apologies
but should you feel the need to offer such a group buy please feel free to pm me ;)

[niwat_spp]

......^_^.......

[niwat_spp]

Inbox clear

[gonzagnr]

Inbox clear
i have sent you 2 pm with some questions that are not related with kess.
very nice work you do on your country.

[zecas]

hi
is there anyone with newer firmware for kess??
so we can program our china tool.

regards

[ovi730]

They have it but they are leaving from it :)

[zecas]

ah i see
if someone make it public they loose job and not eat

[atomiczen]

arrived today my fw4.036 kess v2
installed today, tomorrow i will try if it works on kline and can

[zecas]

arrived today my fw4.036 kess v2
installed today, tomorrow i will try if it works on kline and can

one question do they suply the bin or hex file with firmware to reset the tool with j-link?

[atomiczen]

one question do they suply the bin or hex file with firmware to reset the tool with j-link?
no
token free they tell me
no jlink here

[ovi730]

atomiczen (http://www.digital-kaos.co.uk/forums/member.php/310432-atomiczen) - the fw can be read trough jtag ?

[vicius_the_one]

4.036 can't be

[ovi730]

must be a way to do it.

[Chippy0815]

sure there is a way to do this....
you can hire a person to crack it for you.

I know guys who can do this. The Service will take about 5000 Euro.

But it doesn't make sense for old 4.036 fw, you can get it even cheaper now!

[Susan wang]

maybe working same as galletto v53 !? ;)

Kess v2 work via obd2 port only, fgtech work via bdm and obd2

[ecutuners]

sure there is a way to do this....
you can hire a person to crack it for you.

I know guys who can do this. The Service will take about 5000 Euro.

But it doesn't make sense for old 4.036 fw, you can get it even cheaper now!


Even if you got the dump extracted it is useless, the dump is paired to sd internal serial number

[ovi730]

i delete my post

[2xded]

OFF
ovi730, I deleted too :)

[ominimicu]

Ps dont use taht eddi software...it bricked my kess....reseter or tokens or any other thing taht is not from your seller.

pS ; ecutuners updated my ktag. and workes perfectly!

[Chippy0815]

Even if you got the dump extracted it is useless, the dump is paired to sd internal serial number
and you know as i to modify the serial :p

[ecutuners]

Im talking about SD card serial number, not serial number in kess FW dump

[Chippy0815]

i don't know how it works with newer fw, never tried, but with 4.036 no problem with that.

[ovi730]

please post sd card and software. at least it will be a starting point

[atomiczen]

no
token free they tell me
no jlink here

Tested today with
Peugeot 307 2.0 HDI edc15c2 kline - no id, no read
renault f9q 1.9dci edc16 can - no id, no read

[Chippy0815]

@atomiczen
hw needs some update too....old bug like many kess units have....ovi post solution for example. so have a look at your parts....if you have not these parts, change them and it will work

[betrescudan]

and now you need rework your pcb?....:banghead:

[atomiczen]

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=307548&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=307549&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=307550&stc=1hardware repair solution :
W** - BCR112E
А6c - MMUN2113
6DW - BC817

mulst be changed all of them. but this is a partial one : filters + capacitors is also needed N05B , cap 227 , 2907a , nfe6(filters)
an this is only the begining. Step by step based on the tests that i perform and pcs delivery from tme i will udate you. I have full schematic original one :) . The one i am working on is not mine :(.
Now i still need help for that 2.08 full pack. If no one of you will share with me is mean that..............
Are here real coleagues or only sellers and .............


now i know that some of you do not like to reveal their magicians secrets :burnout:

"I Steal From The Riches And Give To My Bitches"

missing oki chip on mine

[vicius_the_one]

Not even ori has is lately

[Chippy0815]

i'm not for 100% sure, but i think it's for bdm! And this is now ktag.

[bondiblu]

i'm not for 100% sure, but i think it's for bdm! And this is now ktag.

No, Oki chip was primarily for Ford J1850 PWM, but this is now done directly from the NXP, so not fitted anymore.

[atomiczen]

after a little soldering rework on nxp and esmt chip read ok iaw 4af and edc17cp02

[austingreen]

someone will share the chinese 2.11 cd ? For the pcb is soo simpleeeeeeeee. Mich more easy than galletto

Try to search at http://www.chinaautodiag.com/, a site with free CD files.

[ovi730]

why you do not upload your cd ? that links are dead my friend.
It is so hard to make an account on mega ? also make a sd image

[Chippy0815]

@ovi..he is a seller too....he won't upload wether fw nor sd card content. And if someone do, still need to fix the hardware, because it won't work with your tool.
So i don't understand why you don't want to use update service....it is that cheap now and so many people offer.

I'm sure it will take some time to get a "free" solution....maybe files...but than just have files and still no solution to get it work!!

[ovi730]

for hardware is simple. ok...if you are able to keep an iron or soldering station in your hand - you know what i mean. not the hw is an issue

[Chippy0815]

@sorry for that now....but you are annoying whole forum when nearly every post of you is....post fw!!!!
i offered you updating your tool for FREE by PM, but you don't wanted....so please stop asking the whole day 'bout fw....it is very annoying!!

[gazvts]

for hardware is simple. ok...if you are able to keep an iron or soldering station in your hand - you know what i mean. not the hw is an issue


@sorry for that now....but you are annoying whole forum when nearly every post of you is....post fw!!!!
i offered you updating your tool for FREE by PM, but you don't wanted....so please stop asking the whole day 'bout fw....it is very annoying!!
Ovi you refused that offer :banghead:

[morgano]

Ovi you refused that offer :banghead:

lol, then maybe he is not as clever as he wants to make us believe :)

[vicius_the_one]

Well let's see.
1. He extracted 5.00 crp3 or he pretends.
2. Chippy offered him to make update free 6070
3. Why wouldn't he accept if he is able to extract......?!

[Chippy0815]

ok...again...
i offered him not ktag, i offered him kess update, but he should sent the tool to me.
I told him update can't be for free at all, because of the shipping costs....and if i will do the update i can't pay shipping costs und loose money while helping someone...but i think this should be clear...

so if to be precise in this way the update isn't free, because of shipping costs!

But he don't want it, he wanted that i sent him fw for free!

[vicius_the_one]

I also helped him with my hw solution and now he pretends to be master of disaster.... It is easy when info is shared... After someone worked for that...
Ps : I shouldn't say that above but as long as I consider you as my friend and you betray me I feel like ****. Where is respect?
I never asked something free. I can understand the struggle for a fine work and every man working must have his respect.

[gazvts]

Even at that Chippy what is shipping return to eu 16euro at the most !
so even having on to pay shipping return does not take a brain surgeon to work out what to do
unbelievable !!

[ovi730]

update free for 6.070 - are you kiding? he asked me money. Any time my friends. i have ktag on my desk. i am not pretending - i have done it. there are also others that can confirm that is working. first all of you - big tuners- start learning basic of programming. usb-serial for dumies i have that book somewere :)
But he never offered me free update !!!!!:torn: . So if somewone can help me free with ktag update i wold be very happy

[ovi730]

I am not pretending anything. You are upset that i posted the hw solution !!!! i make it free!!!! i was not asking anything.
I had the solution before i was just discussing with you. Did you told me any component marking ????????? no no no my friend.

That i need 6.070 also is true. even 4.036 for kess but 6.070 indeed i need. i refused to pay - is true but come one 200eu ?????????
No one was helping me ------No free update!!!!!!!!!!!! All was asking money - a lot of - in pm
Most of you have stolen the solution - intreruptions of net during file transfer etc...... Come on we are not stupid


Chippy- as i told you - that kess that i repaired was not mine- is not any more in my posesion. i ordered my ledd from china- f..ing post - soo slow
I asked you to send me the fw file.- you refused

Vicius
i am the first one that posted the correct solution ??????????? our best mates from russia were the first ones !!!!!!!!!!!!!!they are the master of.........
Uart method - they posted !!!!!!!!!!!


here on DK i wanted to recive help and to give back help. If there are is any such kind rule here ??????? -If is like this please delete all my posts !!!!!!!!

[Chippy0815]

it's the way you talk to the people....you don' have respect, so why you expect anybody should respect you.
And please stop lying!

So post the message from me where i told you that you have to pay xxx USD/EUR for any update service!!!
You can't, because such kind of mail does not exist!

So please stop talking fairytales and be honest man!
You have postet a good solution yes, but the way you act after this was ##**!!xx

If you will act in future like this i will ignore all your messages and everybody should do the same.
I don't think that anybody wants to help you anymore if you are acting like this

(sorry for OT)

[ovi730]

send me the solution - and show me that i am wrong. I am not link with anything. I neved under - estimated you. I respect - but i am not a lier.
so still waiting you help

[ovi730]

still i am waiting the solution that are you ofering me!!!!!!!!!! so please send it to me !!!!! i did not under- respect you

[Chippy0815]

man, i already told you xxxx times that i WON'T sahre these files with you, and nobody else will do!
I offered you free solution, but you don't wanted to sent me your tool...

and while acting like that in this way i don't want to help you any more!
I'm off with you....sorry for that, but the way you act is very respectless!!!

And next messages an pm i will ignore from you...sorry!

[vicius_the_one]

Chippy he wants fw for having entire project..... To be able to sell further as complete project hw and fw!

[ovi730]

I will never sell .

[vicius_the_one]

Huh.... Big liar that you are.... You think I am stupid anymore. You show no respect and I treated like my brother. You made me be ashame to have same blood. Huh... Russians have solution first.... You are keep lying over and over again. Shall I post your pm when you had their solution? You used me and now you pretend else.

[ovi730]

At least now is clear. Not your ideea. Soo?what are we taking about ? I am stopping here. If somewone want free hw solution pm me.

[vicius_the_one]

Thanks.... You are so kind with my work. You are so good now

[ovi730]

In your signature you have the rework for sale. Come on you little......

[vicius_the_one]

Huh. Me little what? What was problem with me when I helped you? Now I am little....

[ovi730]

Seller. I salute you

[vicius_the_one]

Traitor I salute you. You tell me seller. You sell projects and you tell me seller.... Cardere

[2xded]

For what purpose this resistor soldered on the motherboard?

[PremierD]

OK... enough bickering ... Closed