PDA

View Full Version : volvo s60 fap off . bosch edc 16



rtvservis
19th February, 2013, 01:19 PM
i readed ond bench k line 43 . vith galieto 2 .
pleas check dump i think it is not readed ok.
s 60 2.4 d5 96kw 2005g ecu bosch 281 012 103 .
did i nead to readed vith ade tool or bay bdm .:giveup:

camil
19th February, 2013, 02:13 PM
File is Ok, is partial read, but is 100% usable.

I send you DPF off file. ;)

assitutto
19th February, 2013, 02:16 PM
dpf is on, file is 100% original and good.
it's not full read but file is good

EDIT:
i don't see camil post, sorry :D

Baddog84
19th February, 2013, 02:20 PM
test and report

rtvservis
19th February, 2013, 03:24 PM
since Galletto read partial file. I can write that partial fapoff file withaut Demag ecu . because i dunot have becap complet file:giveup:

assitutto
19th February, 2013, 03:36 PM
yes you can, bt if you want to be safe read ecu with BDM for full dump

rtvservis
19th February, 2013, 04:06 PM
problrm is that the connector of the BDM. from the opposite side of the lid. so I have to take plate of the cooler, which is glued rubber. I am afraid not to damage the board. So if someone is 100 percent sure that I will not damage the contents of the ecu bay writing agen with galieto 2 .
thanks

darius89
19th February, 2013, 09:43 PM
did it 5 times with FGTech2 . only last time got error about cheksum after 10 km driving, but that could see only with diagnostic.

Autotecno2006
3rd August, 2013, 05:59 PM
Hi all I have same Ecu 0281 012 103 Need to check my Bdm file with another one, i am getting internal fault codes, Can someone check or giveme a file, Regards P.

Bosses
3rd August, 2013, 07:12 PM
code ecm 7700 ?

adam12112
3rd August, 2013, 08:10 PM
212401
Can you fap off in this file