PDA

View Full Version : audi a7 95320



ODOMAN
19th February, 2013, 03:38 PM
Hi.
I have an audi A7 2012 with 95320 chip in dash. Km now on 55460kms i need to change to 38122km please.
Thanks.

Ding-Dong
19th February, 2013, 04:13 PM
not possible only by modifying the dump
Ist prepare the eeprom and then obd (dashcoder, dp3 or avdi)

ODOMAN
20th February, 2013, 06:45 AM
Thanks Ding-Dong.
I tried with original Digiprog. Remove dash, modify dump, refit and by OBDII, no luck.
I also tried with Original Avdi. Remove dash read 95320, save, load file, modify, refit dash and read kms 16777775km then enter new and recalibrate kms, But shows can`t do conditions not correct!
I did not use ABPROG to read, load and save files. I used ALL11 reader to read, save and load files.

cokolo
20th February, 2013, 09:04 AM
If not read with Abprog not possible to prepare eeprom for odo with Avdi

motorsport
20th February, 2013, 09:44 AM
If not read with Abprog not possible to prepare eeprom for odo with Avdi

no is possible

cokolo
20th February, 2013, 10:21 AM
no is possible

I try new Audi A6 4G without Abprog and not posibile when you read with Elnec,Galep....

milesbetteroff
20th February, 2013, 10:37 AM
Hi mate when you prepared the EEPROM and refitted the dash did the dash say zero or where there ------ on the dash? If the dash had ------ on it then its is not possible with your tool !

Ding-Dong
20th February, 2013, 12:58 PM
Thanks Ding-Dong.
I tried with original Digiprog. Remove dash, modify dump, refit and by OBDII, no luck.
I also tried with Original Avdi. Remove dash read 95320, save, load file, modify, refit dash and read kms 16777775km then enter new and recalibrate kms, But shows can`t do conditions not correct!
I did not use ABPROG to read, load and save files. I used ALL11 reader to read, save and load files.

see below :

* Audi A8(4H)/A7(4G)/A6(4G)/Touareg(7P) UDS instrument cluster with 95320 - Read/Write EEPROM, modify EEPROM dump for mileage recalibration (requires ABPROG) (http://abritus72.com/vagecuadapt.html)

ODOMAN
25th February, 2013, 12:35 PM
Thanks .
Appreciate the help buddy. My dash shows (-------) so looks like i will have to get the ABPROG!

motorsport
25th February, 2013, 02:36 PM
Thanks .
Appreciate the help buddy. My dash shows (-------) so looks like i will have to get the ABPROG!
ABPROG isjust for read eeprom !!!! you can use any programmer maybe is new version and dont suported by avdi put original backup data it will solved

ODOMAN
25th February, 2013, 03:54 PM
Thanks motorsport.
Did that when first had the problem. Told customer i would give him a call when could do the job.
Regards.