Log in

View Full Version : Opel Insignia FAP


camcam
20th February, 2013, 06:23 PM
Hi, need to remove FAP in Insignia. Volta and others not working, on dash is message Filter is full.

Thanks for help.
firestator
20th February, 2013, 09:05 PM
Hi, need to remove FAP in Insignia. Volta and others not working, on dash is message Filter is full.

Thanks for help.hi red eeprom
strato
20th February, 2013, 11:07 PM
Insignia block Bordcomputer.You see partikulare filter?With
Autocom 2011 or 2012.3,regenerate partikulare filter 1000%
Car must stand in place ,working temp,about 90C,and soft /option regenrate part.filter/work about 25 min,and finish.Engine go to 4000 rpm.This is OK.After 25 min engine
work 800rpm,your BC see display menu function.
No read eprom,because no successful!!!Remeber my Friend.
I solved problem wiht Insignia 2010 2.0D CDTi.Regards
strato
20th February, 2013, 11:19 PM
PS:If you next have problem with MAF sensor/maybe yes/no change because expensive,you must need "good spray" and problem solved.This is my Experience,with new Insignia.
camcam
21st February, 2013, 10:59 AM
Hi,
thanks but we have removed filter already and need to remove from ecu. After 500km is on dash message DPF Filter is full.

Need help with removing in flash. Can anyone help me?

Thanks
macxlulu666
21st February, 2013, 04:17 PM
dpf off is possible - pw
camcam
21st February, 2013, 04:48 PM
I know is possible, i have switched off with volta, but still message "Filter is full" on dashboard.

Can anyone make working removal in my flash?

Thanks
pepeoi
21st February, 2013, 05:07 PM
here is the Insignina for you!
PASS PM
camcam
21st February, 2013, 05:25 PM
Please send pass.

Thank you
camcam
21st February, 2013, 05:35 PM
Anybody else please? Didnt received pass :(

I need urgently.

Thanks
macxlulu666
21st February, 2013, 05:56 PM
Swiftech volta etc .not work :) good luck .reset dpf work on 50 km ...... next limp mode and dtc...
camcam
21st February, 2013, 05:58 PM
Swiftech volta etc .not work :) good luck .reset dpf work on 50 km ...... next limp mode and dtc...

Do you have working solution?
macxlulu666
21st February, 2013, 06:00 PM
yes

http://www.digital-kaos.co.uk/forums/f173/opel-insignia-2008-edc17c19-fap-290095/
camcam
21st February, 2013, 06:03 PM
Not helpful for me.

Can anyone make working remove in my flash?

Thanks

Will pay for working solution of course ...
proel
22nd February, 2013, 10:15 AM
try and report! pw on pm.
camcam
22nd February, 2013, 01:51 PM
here is the Insignina for you!
PASS PM

Thank you, after 500km will let you know.
camcam
11th March, 2013, 02:03 PM
Over 1.000 km and looks good :)
maxsek
14th March, 2013, 01:35 AM
hi friend it is possible to send me a password? thanks
dendirty
26th March, 2013, 02:49 PM
Hi, is it possible to send me the pass as I have exact same problem. I have been using WinOLS but cannot get rid of the message.

Thanks
virus1976
11th May, 2013, 04:28 PM
here is the Insignina for you!
PASS PM
hi PEPEOI it is possible to send me a password? thanks
I have my car in recovery
maax990
12th May, 2013, 01:02 PM
hi it is possible to send me a password.
thanks
Marek
Youneselm
28th May, 2013, 11:17 PM
Can u have password Please
Youneselm
28th May, 2013, 11:17 PM
Can i have pass Please
megagringo
4th June, 2013, 04:47 PM
here is the Insignina for you!
PASS PM

Hi! Send me pass please.
Thanks in advance. =)
Nio
4th June, 2013, 11:22 PM
Dpfoff is possible from eprom. BR.
pepeoi
7th June, 2013, 08:25 PM
contact me by PM with your exact original flashes....