Focus 1.6TDCI please FAP off

[sarkann]

Please could somebody remove FAP from this sw? I tried ES, but MIL is on (EGR + ADDBLUE). Thanks in advance.

[kevfield]

Yoour file dpf off

[maciej]

Hi.
Please Help remove FAP Ford focus II 1.6 TDCI.
THX
Sorry dump Ford1.6 is error ford org is OK

[blazej1200]

Hi.
Please Help remove FAP Ford focus II 1.6 TDCI.
THX

try this file


T

[blazej1200]

Hi.
Please Help remove FAP Ford focus II 1.6 TDCI.
THX
Sorry dump Ford1.6 is error ford org is OK

MPPS is not a good tool for ford focus edc16c34

[taseop]

Hi
I need FAP Off for Ford focus 1.6TDCI please
EDC16C43 1037391374

Thanks for help

[enigmauk]

DO NOT USE MPPS FOR THIS TOOL. IT KILLS CARS!

[assitutto]

your file, password in PM

[maciej]

Hi.
Please Help remove DPF Focus 1.6 2007r ECU edc16c34
0081A010:1
9643626080
MPPS
THX

[Nio]

Do not use mpps m8.

[maciej]

Solved. THX assitutto (http://www.digital-kaos.co.uk/forums/members/51458-assitutto/)

[PSAXSEVOLUTION]

Hello
I need Help please removing DPF OFF Focus C-MAX 1.6 2006r ECU edc16c34

[morgano]

Hello
I need Help please removing DPF OFF Focus C-MAX 1.6 2006r ECU edc16c34

Your file OFF. Pass in PM.

Enjoy.

[cattivik]

guys just get off the bit of -1% to address 1e806c! dpf off
Attention is true for all software

[pulsar2000]

Ok. quick question put mod file Dpf off on 2007 Focus
Edc16 etc,
when ignition on still says Engine malfunction etc, No codes on diags,
someone said need to reset ash counter,
true . False ?
will snapon clear the warning, as i say no faults in system just the warning on dash remains?
also someone said disconnect fap additive tank under rear seats ? anyone Please ??

[Op3n]

I have a problem with a 2007 Ford Focus 1.6tdci edc16c34.
The dpf was removed , but i have an engine malfunction error on the dashboard.When I try to read the errors i get no dtc s. It won't rev more than 3000 rpm . The owner said that someone already modified the flash for dpf off.
Can somebody have a look ? I can't find the adress to try switching off .

[luca22]

I have a problem with a 2007 Ford Focus 1.6tdci edc16c34.
The dpf was removed , but i have an engine malfunction error on the dashboard.When I try to read the errors i get no dtc s. It won't rev more than 3000 rpm . The owner said that someone already modified the flash for dpf off.
Can somebody have a look ? I can't find the adress to try switching off .

Hello Friend

I have not looked at the DTC table, but
DPF switch is off in that file , this solution is 100% good.

Maybe you have a different problem

REGARDS :)
Luca

[mateusz1611]

I have a problem with a 2007 Ford Focus 1.6tdci edc16c34.
The dpf was removed , but i have an engine malfunction error on the dashboard.When I try to read the errors i get no dtc s. It won't rev more than 3000 rpm . The owner said that someone already modified the flash for dpf off.
Can somebody have a look ? I can't find the adress to try switching off .

You have delete all DTC table in this file...

[carbon7319]

Luca or Mateus please upload ori for this Ford.
Thanks

[lucim12]

of course bad file made by sw can make car go into limp mode

[Op3n]

I understood. I didn't make any modifications on this file , so the previous person did well. How can i get rid of the Engine Malfunction message on the display ?

[mateusz1611]

your file with dtc on...

372174

[Op3n]

I tried this file and it turned out to be a problem with the glow plugs ( p0380 error ) . Changed the glow plugs and everything is ok.
Thank you very much !

[Op3n]

Hello again ! I tried to modify by myself this dump for dpf off. EDC16C34 Ford Focus 1.6 tdci.
I want to know if it is ok to be written? It is the 3 switch method at address 1E8060 . Thank you. I don't want to choose ecusafe or volta.

[natalia klaisa]

Hi.
Please Help remove FAP Ford focus II 1.6 TDCI.

[dominik.m]

Hi.
Please Help remove FAP Ford focus II 1.6 TDCI

Your file fap off.

[Op3n]

Hello
I need to remove the DPF and fuel additive from a 2006 Focus bhp.
It also has the dpf pressure sensor error.

[carbon7319]

Help to be helped my friend.

[kryspl]

Hi just a bit dofferent problem but same engine. Can someone tell me (and be able to do mod) is possible to leave filter on car and just off fuel addictive system? I know that whole tank is enough for about 100k miles so car will not surviwe anyway but just need to do MOT to pass emission. Ive tryied do with facm but it wont change flag from rmpty to full - (ivedone everything, all adaptations procedures read tousants of posts about and only one thing wich block regeneration on my car is that facm dobt see that tank is full... so car is in regen mode All the time!! Force burn, forced burn while moving nothing works until system will get signal that bloody tank is full - and it will NOT be full because level sensor probably made for NASA just lost connection and cant be fixed (damaged after fix) if system can be cheated with excact resistamce or some othe way (other than buy a new tank) will be also good.

anyone? Will pay for good solution. Got ids and kess v2


just forgot to mention car is mazda3 2008 1.6 mzrcd fap (dpf with fuel addicteve fluid- not adblue!)

[Milicija]

Hi just a bit dofferent problem but same engine. Can someone tell me (and be able to do mod) is possible to leave filter on car and just off fuel addictive system? I know that whole tank is enough for about 100k miles so car will not surviwe anyway but just need to do MOT to pass emission. Ive tryied do with facm but it wont change flag from rmpty to full - (ivedone everything, all adaptations procedures read tousants of posts about and only one thing wich block regeneration on my car is that facm dobt see that tank is full... so car is in regen mode All the time!! Force burn, forced burn while moving nothing works until system will get signal that bloody tank is full - and it will NOT be full because level sensor probably made for NASA just lost connection and cant be fixed (damaged after fix) if system can be cheated with excact resistamce or some othe way (other than buy a new tank) will be also good.

anyone? Will pay for good solution. Got ids and kess v2


just forgot to mention car is mazda3 2008 1.6 mzrcd fap (dpf with fuel addicteve fluid- not adblue!)

... the level sensor faults come, when there are no enough additive in the additive tank (level is low). It's kinda expensive (for some people)... If you don't want to buy the additive, just buy 1-2 liters of diesel, and add diesel to additive tank, and reset the level as the diagnostic equipment asks :) Never had faulty level sensor ;)

[kryspl]

... the level sensor faults come, when there are no enough additive in the additive tank (level is low). It's kinda expensive (for some people)... If you don't want to buy the additive, just buy 1-2 liters of diesel, and add diesel to additive tank, and reset the level as the diagnostic equipment asks :) Never had faulty level sensor ;)

Lucky You... but loads of ppl got same problem - after resets couter done prime bleding everything and in ecu shows up that tank is filed up in 100% but FLAG is setet as EMPTY but should be FULL! Thats main problem