Visteon Ford 4500 decoding - for all

[yasser]

Hi, friends,
I tryed this radio with carprog and everything is OK.
I'm uploading those pictures, because I'm sure too manu people need to make it easy without usig this special tool for ford, so with carprog is easy.
I hope those pitures will be helpfull for many people.

Regards and cheers.
Yasser

[teerak2uk]

Done with clone or original?

[yasser]

Clone ofcourse ;)

[teerak2uk]

Clone ofcourse ;)

do you find it ok for airbag, radio stuff as i know its not good on mileage

[carradio2001]

Where did you find ST9F120 in carprog menu ?

Carradio2001.

[yasser]

There is not st92F120 in menu, I just select st92F150 in menu and start reading, after that I write it.

By the way I have two carprogs.
One is from chine, another one from reseler in BG.
From reseler is with reflashed atmega and one pin is lifted up and connected to gnd. The problem is that exactly this one can not read this ST92xxxx, always giving error with boot. Device from china doe not have problem. Working OK.

[pavelpervomaysk]

Really cool info

[zdzicho1233]

Thanks. It is OK!!

[vima]

thanks for the info yasser (http://www.digital-kaos.co.uk/forums/members/101270-yasser/)

[mardude]

Thanks, Friend.

[zanovo]

Hello. I have the same problem with the same radio, but I see another board type in it.
Can you give Carprog A10 cable pinout ?
... or what color of A10 cable connect to what pin of ST92F124?

220229220231

[zanovo]

It`s my working solution for all.
Tested with Carprog.

220271

[mikemike]

Hi!I have lock13 problem ford5000 rds.
I'd like reprogram st92f120,with carprog clone.
Please picture with A10 cable pinout!
Thanks!

Solved with another MCU.

[ubistvo]

Hi, friends,
I tryed this radio with carprog and everything is OK.
I'm uploading those pictures, because I'm sure too manu people need to make it easy without usig this special tool for ford, so with carprog is easy.
I hope those pitures will be helpfull for many people.

Regards and cheers.
Yasser
EXCELLENT
Work 100% I try and work OK
Thanks yasser

[neksus]

Hi, friends,
I tryed this radio with carprog and everything is OK.
I'm uploading those pictures, because I'm sure too manu people need to make it easy without usig this special tool for ford, so with carprog is easy.
I hope those pitures will be helpfull for many people.

Regards and cheers.
Yasser

Tnx work fine!

[neksus]

It`s my working solution for all.
Tested with Carprog.

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=220271&stc=1

I have your solution. Work perfect! Tnx

[neksus]

It`s my working solution for all.
Tested with Carprog.



I have your solutions! Many thanks!

[maro012]

yasser could you look at my bin file - ST92F120 - ford 4500 RDS
I connected my carprog using your picture - but I had to remove resistor 1k (between read and vcc) from A10 adapter (all from China)
Is this processor locked ? :(

If somebody needs pin code to this radio - use http://www.pumapeople.com/decode.php
(http://www.pumapeople.com/decode.php)
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=326191&stc=1

[dragoshu]

Hello,
Can you help me with connection and colors Carprog for this cd6000 ford by visteon.472648472653472649

regards,
\dragoshu

[audiopoint]

Hello,
Can you help me with connection and colors Carprog for this cd6000 ford by visteon.472648472653472649

regards,
\dragoshu


if MCU is TMS470 you need Jlink
i

[pocetnik1234]

friend i conected like in first picture i have boot error is this error on mu carprog or i should turn on the radio when i am reading

[designer79]

v007196

7809

[petronijul]

v007196
correct code is 2466

[tomek3232]

yasser could you look at my bin file - ST92F120 - ford 4500 RDS
I connected my carprog using your picture - but I had to remove resistor 1k (between read and vcc) from A10 adapter (all from China)
Is this processor locked ? :(

If somebody needs pin code to this radio - use http://www.pumapeople.com/decode.php
(http://www.pumapeople.com/decode.php)
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=326191&stc=1
I have an identical problem, was it possible to solve it?

[marky1991]

Dont work for me, any new photo?

[marky1991]

https://i.ibb.co/kXVfNv7/Whats-App-Image-2020-07-22-at-14-20-40.jpg (https://ibb.co/NKgPcbv)
https://i.ibb.co/r0KfcST/Whats-App-Image-2020-07-22-at-15-08-25.jpg (https://ibb.co/ZXR1YPt)

https://i.ibb.co/t4WZ0sR/Whats-App-Image-2020-07-22-at-17-39-31.jpg (https://ibb.co/jT1VCMt)
Dont works for me.

Here are the photos , anyone can help me?

I have got carprog 8.21 online version

[marky1991]

upppppppppppp!

[marky1991]

upppppppppppppppppppppppppppppppppppppppppppp

[kappa1]

What mcu you have no detail partnumber etc...

[marky1991]

What mcu you have no detail partnumber etc...

MCU number:

ST92F124V1QB

Visteon PWB12984
VP5S6F-14A608-AA

[dragoshu]

For me works like share
thanks

Sent from my SM-A605FN using Tapatalk

[dragoshu]

I have your solution. Work perfect! TnxThanks

Sent from my SM-A605FN using Tapatalk

[belcitroen]

what color of A10 cable connect to what pin of ST92F120
ford fiesta 4500 rds e o n

[RadovanPetkovic]

941904941905
I had the same problem. I want to share the solution so that people don't suffer anymore with reading this processor. It is read by CarProg with ISP communication. It is read by BeeProg but only via a 100/40 pin adapter which is extremely expensive.
When recessed into the printed circuit board, especially the pins used for programming and reading the ISP. There is one resistor network of 473 resistors (4 x 47k ohms). It needs to be downloaded and then the processor will be read and written extremely quickly and efficiently......

It is necessary to remove the resistance net. Read the eprom of the processor, modify the content with a calculator (or manually), write in the eprom of the processor. Re-solder the resistance grid. Job done

[fuzz1]

941904941905
I had the same problem. I want to share the solution so that people don't suffer anymore with reading this processor. It is read by CarProg with ISP communication. It is read by BeeProg but only via a 100/40 pin adapter which is extremely expensive.
When recessed into the printed circuit board, especially the pins used for programming and reading the ISP. There is one resistor network of 473 resistors (4 x 47k ohms). It needs to be downloaded and then the processor will be read and written extremely quickly and efficiently......

Hello my friend
What needs to be downloaded?

[attilaa0]

Not downloaded, he want to say to take out the 4x47kohm rezistor for better comunication. Look at picture.

[alicu]

972666
Am o problemă identică, a fost posibil să o rezolv?

I have exactly the same problem.
Can someone help me ?

[Nostalgic85]

Hello colleagues, did anyone make an MD4500 with a Motorola MC68HC11PA8 mcu? If they did, does anyone have the connection points to be able to read it and see if the lock13 can be removed... thank you very much in advance for any help you can give me.