CAS3+ Dead

[kautuvera]

solved.....

[blerim shehi]

Hi Friends
E71 35d CAS+ The data I used is in the attached file.
After I use read by xprog it CAN NOT IG ON any longer
now Car is dead
key and remote not work
What I can do now
Thanks for any help!

I think that this bin file, EEPROM is ok ..TMpro can make a key for this CAS3 ..problem is to FLASH..:hmmmm2:

[kautuvera]

yes..problem is to FLASH..
nobody ?

[bearheroes]

try to use this.

[kautuvera]

try to use this.
this file will 100% work?

[yugo45]

Flash size of this MCU is 512 kb, you have 2048kb.
What MCU did you choose to read ?

[kautuvera]

Flash size of this MCU is 512 kb, you have 2048kb.
What MCU did you choose to read ?
hi
MC9S12XDP512

[didi_du_93000]

Hello all,

I have a CAS3 from cooper 2008,

I have try to read it with codiprog USB but have a strange file and strange size (see attachment).

So i have put back the CAS3 without write any bytes inside.

AND CAR DON'T START NOW!!!!
The car don't reconize the key.
key and remote not work

Same result than kautuvera.

In attachment the flash and eeprom from the cas than i have read with codyprog usb and the picture form the sticker on CAS3 unit (Sw and Hw information).

Thanks in advance.

[blerim shehi]

Hello all,

I have a CAS3 from cooper 2008,

I have try to read it with codiprog USB but have a strange file and strange size (see attachment).

So i have put back the CAS3 without write any bytes inside.

AND CAR DON'T START NOW!!!!
The car don't reconize the key.
key and remote not work

Same result than kautuvera.

In attachment the flash and eeprom from the cas than i have read with codyprog usb and the picture form the sticker on CAS3 unit (Sw and Hw information).

Thanks in advance.
i want to now:firtsly...you want to be the KM or to create a new key??please read again with the Xprogm...

[didi_du_93000]

Sorry i have forget to put the picture of CAS3 sticker.

ImageShack® - Online Photo and Video Hosting (http://imageshack.us/photo/my-images/266/cas3mini2008.jpg/)

[didi_du_93000]

i want to now:firtsly...you want to be the KM or to create a new key??please read again with the Xprogm...

Hello and thanks for your reply.

I would like to change mileage.

I haven't xprog m yet.

I have just codiprog usb.

[blerim shehi]

Hello and thanks for your reply.

I would like to change mileage.

I haven't xprog m yet.

I have just codiprog usb.

try to read eeprom...all bin files you have are flash..the eeprom dosen t egsist

[didi_du_93000]

How much normal eeprom size and flash size.

[blerim shehi]

How much normal eeprom size and flash size.

eeprom size:4kB
flash size:512 kB

[yugo45]

If you need to do just Km , all you need to read is Eeprom.

[didi_du_93000]

If you need to do just Km , all you need to read is Eeprom.

I know it.

But the car don't start now and i have just read flash and eeprom without change anyone from dump.

[pepi]

I heard many crashes with Codiprog on CAS units. It is better to use Rosfar red, Xprog-m original or Smok HC12 programmer.

[didi_du_93000]

Now i know it!!!!!
But it's too late!!!