PDA

View Full Version : BYTESHOOTER HELP!


zsoltika
25th February, 2013, 11:38 PM
Hi!

I probe to reprogram with BS AUDI A5 EDC17CP14HW2. Connect the pins, boot, and press ID ->OK.
But press the read ->Error: ECU is not responding.
Whats wrong?

thanks!

zsolt
veloseeped
26th February, 2013, 06:58 AM
But press the read ->Error: ECU is not responding.
Whats wrong?


Do you check ECU for boot password protection?
zsoltika
26th February, 2013, 09:33 PM
TPROT 8/10 MODULE is not active in my BS.I think, the ECU is protect. If the protection is active, not possible the reading?

BR!

zsolt
dragger
26th February, 2013, 11:15 PM
TPROT 8/10 MODULE is not active in my BS.I think, the ECU is protect. If the protection is active, not possible the reading?

BR!

zsolt

First you must read and save the password without boot mode.

Than you must add password file and read the file on boot mode ;)