PDA

View Full Version : KTag pictures and experiences



bts
2nd March, 2013, 10:47 PM
Hi friends,

Waiting Ktag pictures and experiments.

bts
2nd March, 2013, 11:03 PM
Ktag EDC17 read-wirite picture

J_amb_o
3rd March, 2013, 12:11 AM
Aah KTAG clone, the fastest and easiest way to brick an ECU :D

z786
3rd March, 2013, 12:14 AM
Aah KTAG clone, the fastest and easiest way to brick an ECU :D

tell us more

bts
3rd March, 2013, 12:21 AM
My KTAG,
I've tried some of the ECU, the device works well and very fast.

bts
3rd March, 2013, 12:52 AM
EDC17 Ktag read.
My pc ecu picture.

popescovici11
3rd March, 2013, 12:58 AM
some of user from this forum are from stupid company alientech... they will tell that with such clone it is easy to brick ecus.

bts
3rd March, 2013, 01:03 AM
Ktag master clone.
A quality pcb.

cheester
3rd March, 2013, 09:18 AM
Ktag works perfect. Doing same job as ori tool. Have lots of mates using ktag clone and no problems at all!! Fully recomended!!

Just wonder hows the clone kess v2 working?

eddieddi
3rd March, 2013, 10:03 AM
Is there anyone that have a K-TAG clone without glue on PCB ?
I am thinking of buying one, but with glue not good to repair in future (maybe)...
:(

BR
Eddi

bts
3rd March, 2013, 11:48 AM
Ktag to buy

link:
Quality A+ KTAG K TAG ECU Programming Tool ECU Prog Tool Master Version freeshipping by DHL EMS-in Code Readers & Scan Tools from Automobiles & Motorcycles on Aliexpress.com (http://www.aliexpress.com/item/Quality-A-KTAG-K-TAG-ECU-Programming-Tool-ECU-Prog-Tool-Master-Version-freeshipping-by-DHL/653355128.html)

bts
3rd March, 2013, 12:04 PM
Ktag pbc micro SD Card

eddieddi
3rd March, 2013, 02:32 PM
Ktag to buy

link:
Quality A+ KTAG K TAG ECU Programming Tool ECU Prog Tool Master Version freeshipping by DHL EMS-in Code Readers & Scan Tools from Automobiles & Motorcycles on Aliexpress.com (http://www.aliexpress.com/item/Quality-A-KTAG-K-TAG-ECU-Programming-Tool-ECU-Prog-Tool-Master-Version-freeshipping-by-DHL/653355128.html)

Do you know if they are selling version with or without glue ?

BR

bts
3rd March, 2013, 07:01 PM
Do you know if they are selling version with or without glue ?

BR

I do not know.
I never asked.

bts
3rd March, 2013, 10:43 PM
Do you know if they are selling version with or without glue ?

BR



Ktag projects


Hardware, software for programming ecu and chip tunning car (http://car-prog.com/)

soplillo
5th March, 2013, 07:35 PM
Ktag pbc micro SD Card

Surely the firmware is in micro SD card, save the content for a future backup in case of lock the interface.

bts
7th March, 2013, 04:53 PM
Surely the firmware is in micro SD card, save the content for a future backup in case of lock the interface.


Do you have someone who reads this memory card?

jmush303
8th March, 2013, 09:01 PM
Hi
Today i have remove the epoxy on sd card in my ktag
But i cant remove it tomorow i check if there is not epoxy under the sd card support
If its good i can read sd card in few days
I repport when its done for post the dump
Bye

jmush303
9th March, 2013, 02:05 PM
Hi
Today i have remove the sd card not readable on windows because its raw drive
So i take utility softwrae to make image of this raw drive
RAWDISKCOPY free
Image size 46 Mb
I start my ktag with 1.93 software but without sd card for look the difference
I see in info that the ktag info are same like the blocked ktag
I re-put the sd card and re open with 1.89 software and i see my ktag is blocked
Conclusion:
Its not on SDCARD
because i rewrite original image on sd card
Same problem i have to buy a new ktag
Maybe ftdi eeprom or upc or usb patch
Thks

jmush303
9th March, 2013, 03:06 PM
i forget does someone with ktag can send the dump of his ftdi eeprom
I test with mprog 3.5 he can read the eeprom
This is my eeprom ftdi

cp2010
9th March, 2013, 03:17 PM
counter lock inside in mcu

jmush303
9th March, 2013, 11:42 PM
Does there is patch for rewrite good file?
Like galetto 2 clone
Thks for help

mitch2
12th March, 2013, 07:46 PM
Hi mates! , ktag clone works fine with PSA bosch 7.4.4

Roader
12th March, 2013, 09:40 PM
I look that chone clone have many cables,can i ask is there any labels in that cables to know witch cable for what have to use it?

autotuning
13th March, 2013, 10:03 AM
The software tells you the connections when you select the vehicle you are working on

mitch2
13th March, 2013, 12:18 PM
I look that chone clone have many cables,can i ask is there any labels in that cables to know witch cable for what have to use it?

the cables inside in bags with labels and the software tell you what cable you need to use.

niwat_spp
14th March, 2013, 03:31 AM
update to v1.93

https://rs961p2.rapidshare.com/files/3266830827/InstallSW.rar?directstart=1

cheester
14th March, 2013, 09:10 AM
niwat_spp link doest work : Download permission denied by uploader. (0b67c2f5)

Did you test on your ktag clone? Working 100%?

soplillo
14th March, 2013, 10:17 AM
The link is dead, have you tried to update your ktag clon?

xanubysx
14th March, 2013, 12:18 PM
Please new link ...

jmush303
14th March, 2013, 11:09 PM
Do not update uour ktag clone if not you lock interface
Only solution is to change cpu but i just know that
And cpu is under epoxy s..t

asso
17th March, 2013, 03:11 PM
ktag internal

Crash-100
17th March, 2013, 04:47 PM
how know what is CPU and Flash in KTAG

danfos
19th March, 2013, 11:00 PM
ktag internal

Electronic parts numbers, does anyone know?

bts
24th March, 2013, 02:55 AM
Have the repair?

mitch2
27th April, 2013, 11:44 AM
Is posible to get fles backup from sd card inside ktag ?
i have from kess V2 clone and i want to know if are the same files ?
if some one has a copy from sd card of ktag please share here thanks

mitch2
27th April, 2013, 12:21 PM
Some one had readed micro Lpc2478FBD208 ( ARM7 microcontroler) from ktag clone?
My ktag has 20 pin solder for programing like jtag programer

mitch2
5th May, 2013, 08:39 AM
And eeprom 24C64?...

bts
9th May, 2013, 08:51 PM
Both pieces of information.

mitch2
10th May, 2013, 09:20 AM
Both pieces of information.
i can read 24c64 for you
but lpc2478 i cant read only can write you need original dump from your chinesse suplier.

asso
21st May, 2013, 01:26 PM
199507with the repair I did to my ktag now I no longer have the problem of the block, this is a unit of a spear y 1300mj 8df on this ECU I excluded the fap and I did the programming in j-tag and the checksum was calculated automatically, now I'm continuing tesy.https://sites.google.com/site/elettronicaassoracing/home

didi_du_93000
21st May, 2013, 11:59 PM
Hello,

I Have Ktag and i would like to know where i can found the pdf for connection and how can i use it?

Regards.

asso
25th May, 2013, 02:17 PM
when you open the program, select extras, then the ECU and see help and got the pdf connection ECU

jmush303
29th May, 2013, 08:58 PM
Hi
Could you send your 24c64 eeprom dump?
I have my chineese ktag blocked i want to test to put your dump
Thks a lot

19antonio
23rd July, 2013, 11:26 AM
someone would be kind enough to send photos of good quality, motherboard ktag. to check if any component is missing, my ktag does not work.
thanks

euroscan1
15th September, 2013, 12:32 PM
here you are, good resolution photo.

cruuz
29th October, 2013, 08:33 PM
in manual of the CPC2478fbd208 the input of the tristate pin P2.10 is used about 3ms after reset to determin ISP mode. Forcing this pin to HIGH (3.3V), should indicate NO PROGRAMMING, so the flash will not be written. So maybe by doing this the software can not destroy the flash when conecting to Inet and maybe at the same time no tokens will be lost. I don't have an ktag clone but I would try :)
I also didn't find the pinout of this mcu, so I don't know where P2.10 is located

atomiczen
3rd November, 2013, 06:33 PM
199507with the repair I did to my ktag now I no longer have the problem of the block, this is a unit of a spear y 1300mj 8df on this ECU I excluded the fap and I did the programming in j-tag and the checksum was calculated automatically, now I'm continuing tesy.https://sites.google.com/site/elettronicaassoracing/home
i cannot read a 8df in jtag with my ktag, software tell me everytime "check connection and power supply",
how you have solved?
and cannot read a edc17c46 vag also, after 20% tell me checksum error, made a test with kess v2 in bootmode, works ok.

Anmed
30th December, 2013, 10:46 PM
Hi all! Please help me...
I have dump NXP LPC2478, but I have not SD-card content and I have not 24c64 content - I lost it (((

Anmed
5th January, 2014, 04:56 PM
I think you will like this photo))) 238188

super jumbe
26th February, 2014, 01:40 PM
Thinking of buying one, has any one tried programming B6 Passat 2.0LT TDi full ECU reading SUCCESSFULLY?

fsvsunix
13th March, 2014, 07:00 PM
here is the nxp pinout http://www.nxp.com/documents/data_sheet/LPC2478.pdf

so after around 40 flashes today i got the message from ktag that i have only 9 more times to program an ecu.

The k-tag was bought from ecutool and there is no text saying that it had tokkens or something else..

My questions are :

Has any one solved that problem and if yes in what way?

Has anyone installed the replacement chip for 1.89 version? Did it work? Where could i buy this chip? I found out some places but not sure if they are ok.

Is there any other solution that could save me from desoldering?

fsvsunix
13th March, 2014, 07:25 PM
Hi all! Please help me...
I have dump NXP LPC2478, but I have not SD-card content and I have not 24c64 content - I lost it (((

can you share the dump please? Is the dump clean or you have already used it on a device?

fsvsunix
22nd March, 2014, 12:46 PM
Since there are a lot of people that does not care to help or contribute to this forum i have password protected
the ktag binary for tokens reset.

It is for use with jlink.

Do not bother to ask for password if your posts are not helping people here...I will not give it out unless you deserve it.


251694

doctorx6
22nd May, 2014, 08:02 PM
Salve e Password chiedere Possibile per il vostro file KTAG potrei aiutarvi .Grazie saluti

moky
22nd May, 2014, 09:38 PM
someone tested this clone on mercury marine motor (bdm: Motorola pcm0702m) ?

mislav88
22nd May, 2014, 10:17 PM
someone tested this clone on mercury marine motor (bdm: Motorola pcm0702m) ?

good old bdm100 works fine with this, tested many times

moky
22nd May, 2014, 10:34 PM
i saw that but thanks to confort me :stung:

sinan33
23rd May, 2014, 12:21 PM
I have tried the K-tag 1.89 with a vw amarok edc17 c54 ecu.
It starts to read but at %63 (sometimes %6 sometimes %66) it shows reading error and stops the reading process.
Does anyone have an idea about this issue?
I have used the 12 v adapter which sent with the tool; is it because of this?
Regards...

niwat_spp
23rd May, 2014, 06:21 PM
Change adaptor to car baterry or biger adaptor i think problem solve.. my ktag original same your problem ..you can try

masterb
5th July, 2014, 05:46 PM
I have tried the K-tag 1.89 with a vw amarok edc17 c54 ecu.
It starts to read but at %63 (sometimes %6 sometimes %66) it shows reading error and stops the reading process.
Does anyone have an idea about this issue?
I have used the 12 v adapter which sent with the tool; is it because of this?
Regards...

Hello!

some other have same problem, and solve this ?

best r

Anmed
6th July, 2014, 07:05 PM
some other have same problem, and solve this ?
It's impossible to clone version 1.89

masterb
7th July, 2014, 05:24 PM
you mean v1.89 don't read edc17v54 ?
i have problem with other EDC17

Anmed
8th July, 2014, 12:36 PM
you mean v1.89 don't read edc17v54 ?
Assumptions and accurate knowledge - are two different things. I have accurate knowledge:Version 1.89 does not work with eds17с54. The original does not work, does not work clone too. The original K-Tag began working with eds17c54 only version 1.94.
A more recent version than 1.94 - works well the original and the clone. It's not just about the software but also update firmware (NXP+SDcard).

didi_du_93000
12th July, 2014, 11:30 AM
Hello,

I have error with my k-tag

"operation not allowed".

Before this error i have read and write this ecu.

But second time have this error.

It's Ktag & ksuite problem?

didi_du_93000
12th July, 2014, 12:03 PM
I have try to read another ecu with different mcu inside and it's working. Maybe the ecu is dead ?

ominimicu
12th July, 2014, 12:31 PM
I had problems on newwest edc17 from kia..got a youtube video and all
https://www.youtube.com/watch?v=AxzqhgvEhkE

centrohifi
23rd July, 2014, 07:07 AM
hello friends
do try to make unload of information PDF , but links do not work!
I have, for connection MJD8 Magneti Marelli ....


Thank you

didi_du_93000
23rd July, 2014, 07:16 AM
Upload pdf don't work...
Don't forget.... It's a clone....
Go to the ecu on list and before the screen for read/write you will see the ecu connection.

centrohifi
23rd July, 2014, 08:14 AM
you friend, m I have seen, I must connect information to ECU! family ENU-L-0303 , but there are no instructions to connect! see the folder " help " :)

veloseeped
23rd July, 2014, 03:50 PM
see the folder " help " :)

Checked. All you need is in .mht file

centrohifi
23rd July, 2014, 03:58 PM
friend, this file I saw it too!
read in step 5 !!!!!

" I need to know how to connect ECU?!?!?!? "

veloseeped
23rd July, 2014, 04:13 PM
friend, this file I saw it too!
read in step 5 !!!!!

" I need to know how to connect ECU?!?!?!? "

See better.
Below is printout of file .mht I've send to you.
269845

centrohifi
24th July, 2014, 02:44 PM
thanks friend, but I can not read the cable to be used ...
144900T ??????

70max
16th August, 2014, 11:25 AM
Hi friends,


My Ktag recently bought model:
Sw: 2.06
Version FW: 5,001


Key tractors off
Button car truck motorcycle boat, working


Many protocols off edc type 16C39 does not work
and many others.


But he says the key protocols that are active
How come this problem?


Thanks for your help

sinan33
17th August, 2014, 11:07 PM
Use it with ksuite v1.89.
Everything will be OK.

70max
17th August, 2014, 11:15 PM
Use it with ksuite v1.89.
Everything will be OK.

Thanks for your reply,
then uninstall the sw "2:06"


and install sw1.89
rar compressed folder with 1.89?

PSAXSEVOLUTION
16th September, 2014, 03:10 PM
I tested myself on my passat 2.0 tdi 2006 and all OK....R/W without any problems

Best Regards

darius89
16th December, 2014, 09:24 PM
Hi, I installed 2,06 version and I dont have help - connection files.... How to download ??? or I need to instal 1,89 version first ?

ominimicu
16th December, 2014, 10:09 PM
Copy help files from old version folder

darius89
16th December, 2014, 10:27 PM
Have some, but not active help button on tricore . In folder help I have all edc17 help files. But no in soft

bts
28th February, 2015, 06:41 PM
Please help

austingreen
17th March, 2015, 08:34 AM
Hi, I installed 2,06 version and I dont have help - connection files.... How to download ??? or I need to instal 1,89 version first ?
Update to 2.10 by browsing http://www.chinaautodiag.com/download/k-suite-2.10.zip, after you choose car detailed information, you will get prompts I.E: warning, notice, recommendation, instruction, pinout, cable number, etc.

sokolomo
17th March, 2015, 04:17 PM
Hello guys
I made an acquisition of a 2.06 k -tag , until now the tool does not support reading EDC17 , EDC16 , ME7.4.6 only a dme msv70 could be read what is problem for this? thank you

immoresearch
25th August, 2016, 04:51 PM
My help button is not active so i can't get connection instruction.help out please.

hk06
17th August, 2017, 04:36 PM
copy help folder from dvd to c:/ksuite