PDA

View Full Version : MB C220 CDI EDC15 C6 no more 3000rpm



franke232
3rd March, 2013, 09:20 PM
Hi,
I am having a problem with a C220 cdi W203 2002, ecu is a EDC15C6.

At first he tried to do the workshop with KWP2000 plus power but at the time of programming were frightened because the fans started and lost data flash 29F400.

I have written with KESSv2 with software rightful but the vehicle does not exceed 3000rpm. do you think that need to change the ECU? I tried with 3 different data from the same software and even encourage it, but still the same.

Thanks for all

zoyzoyni
3rd March, 2013, 09:26 PM
did you read foult codes?

zoyzoyni
3rd March, 2013, 09:30 PM
cause for this car they are is two softwares.one with y75 swichoff valve and one no.before many years i try to write me too one e270 cdi and the ecu start smooke.:canabis:

Babos
3rd March, 2013, 09:31 PM
try to use star diagnosis and coding ecu.

kire106ka
3rd March, 2013, 10:55 PM
Hi,
I am having a problem with a C220 cdi W203 2002, ecu is a EDC15C6.

At first he tried to do the workshop with KWP2000 plus power but at the time of programming were frightened because the fans started and lost data flash 29F400.

I have written with KESSv2 with software rightful but the vehicle does not exceed 3000rpm. do you think that need to change the ECU? I tried with 3 different data from the same software and even encourage it, but still the same.

Thanks for all

Post ecu numbers to check right file for it

leandroks
4th March, 2013, 03:32 AM
post the dtc and we ll help u...