estarsim
6th March, 2013, 11:00 AM
when you upgrading but can't finish it
http://p13.freep.cn/p.aspx?u=v20_p13_photo_1301090949207647_0.jpg
you can try this as follow
1.connect receiver to pc with ethernet port.
2.press standby button then power-on.
3.open DCC and make a telnet with receiver.
4.in Misc --Flash Sector Recovery, change DISABLED to ENABLED
http://p13.freep.cn/p.aspx?u=v20_p13_photo_1301091004328442_0.jpg
5.then save it
http://p13.freep.cn/p.aspx?u=v20_p13_photo_1301091005382307_0.jpg
6.now open your browser and try upgrading again.
gook luck.
http://p13.freep.cn/p.aspx?u=v20_p13_photo_1301090949207647_0.jpg
you can try this as follow
1.connect receiver to pc with ethernet port.
2.press standby button then power-on.
3.open DCC and make a telnet with receiver.
4.in Misc --Flash Sector Recovery, change DISABLED to ENABLED
http://p13.freep.cn/p.aspx?u=v20_p13_photo_1301091004328442_0.jpg
5.then save it
http://p13.freep.cn/p.aspx?u=v20_p13_photo_1301091005382307_0.jpg
6.now open your browser and try upgrading again.
gook luck.