AUDI A 6 please help

[Doru Lucian]

Good evening to all DK members.I have a huge problem and I hope to receive some help from you.I have an AUDI A 6 with AKN ,2.5 L engine ,from 1999.injection type EDC 15 ,old ECU with 5 jacks, and I want to change the that ecu with the new one type EDC 15VM+,I have everithing ,ecu,pump,electric wires,but no dashbord,so I need from you to make immo of from me.I hope to Mr Lupu_Sandu, to read about my problem,beaucose he helped me several times with 100 percent good solutions.Thanks you all for help and for your good activity on this wonderful forum.PS, I forgot to say to you I need if its possible to transform in my flash from automatic garebox to manual.

[kowalwalcz]

Good evening to all DK members.I have a huge problem and I hope to receive some help from you.I have an AUDI A 6 with AKN ,2.5 L engine ,from 1999.injection type EDC 15 ,old ECU with 5 jacks, and I want to change the that ecu with the new one type EDC 15VM+,I have everithing ,ecu,pump,electric wires,but no dashbord,so I need from you to make immo of from me.I hope to Mr Lupu_Sandu, to read about my problem,beaucose he helped me several times with 100 percent good solutions.Thanks you all for help and for your good activity on this wonderful forum.PS, I forgot to say to you I need if its possible to transform in my flash from automatic garebox to manual.

24c02 with immo off

WAUZZZ4B83N009174
AUZ7Z0B2156645
236721,50 KM
PIN 00340

[Doru Lucian]

thank you but not work.the engine start for 2 seconds .

[konop11138]

In this ecu Edc15VM+ should be 29F400 and 24C04.

[Doru Lucian]

AM29F800BT>8E0 907 401 P>EDC15VM+>BOSCH 0 281 011 136.help please immo off + flash from automatic to manual garebox (SORY in my mistake is 24C04 not 02

[kire106ka]

If these car have VP44 pump it's not so easy
Try these if it not work ask member z786 (http://www.digital-kaos.co.uk/forums/members/67210-z786/) he have simular problem maybe he will help you if he manage to fix.

[konop11138]

Try this solution, checksum flash is ok. Not tested.

[Doru Lucian]

yes it have vp pump,thank you for the file Iwill try this days,when i will have time to put again the this new instalation .......I need the car and I put the old instalation for cupple days .thank you for your reply,have a good evening.

[Doru Lucian]

Try this solution, checksum flash is ok. Not tested.
the file for flash is empty mate,sory.

[yugo45]

V6 TDI Immo off does not work. It is not ECU problem it is diesel pump problem.
Pump cuts off car .
Immobilizer III Injection Pump Swapping - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/Immobilizer_III_Injection_Pump_Swapping)

Only way I found on this car to adopt , cluster , ECU, keys and pump

[Doru Lucian]

strange problem ....on seme Audi 2.5 V6 engine with VP pump EDC15 old tipe (5 jack) I made immo off in 24C04 and the car runing ok .In Ross tech swaping procedure I thing(not shure) it is about adapt new pump,not maching instrument cluster(key),with ECU engine.

[yugo45]

strange problem ....on seme Audi 2.5 V6 engine with VP pump EDC15 old tipe (5 jack) I made immo off in 24C04 and the car runing ok .In Ross tech swaping procedure I thing(not shure) it is about adapt new pump,not maching instrument cluster(key),with ECU engine.
5 plug ECU is immo 2 , and do not need adopt diesel pump, and immo off works .
EDC 15VM+ is immo 3 need adopt pump.

If you have new/used ECU you need adopt ECU to cluster as well.
I just wrote that all of them key , pump, cluster and ECU has to be adopted to each other. It all depend what you are changing.

[Doru Lucian]

I have harnest plug ,ecu of engine(edc15vm+)with pump from the same donor car ,but no instrument ,and no transponder key.thats way I need immo off.and more inportant I need flash for manual transmision.maibe you can help me with dump for manual garebox ,then I will try to procure an immo 3 instrument cluster new transponder and try to maching oll togheder.

[yugo45]

With VCDS you go to:
01-Engine
07-Coding and recode it to manual transmission.
Do not need to do anything in software.

If you are using original cluster and you had Immo 2 system , you will need to replace cluster as well.
Immo 2 does not work with Immo 3 .
ONLY Immo 3 will work with immo 2 but not other way.

[Doru Lucian]

With VCDS you go to:
01-Engine
07-Coding and recode it to manual transmission.
Do not need to do anything in software.

If you are using original cluster and you had Immo 2 system , you will need to replace cluster as well.
Immo 2 does not work with Immo 3 .
ONLY Immo 3 will work with immo 2 but not other way.
coding original 01017 .try to recode but not accept difrent code.

[yugo45]

coding original 01017 .try to recode but not accept difrent code.
If is like that then you need to flash ECU.

BTW , why are you ding this?
Is there any benefit of that?

[Doru Lucian]

If is like that then you need to flash ECU.

BTW , why are you ding this?
Is there any benefit of that?
Yes ,thats way I need that file,to reflash the ecu for manual transmision,and the benefit is that :more power(I change the injectors to ) quieter engine sound,(the pump is with post injection) faster response to throttle.I think it is worth the effort

[whiskymk]

This is your file without immo

[Doru Lucian]

This is your file without immo
thanks my friend ,but I need the pass for this rar.

[Doru Lucian]

nobody can help me with a dump for flashing that ecu for manual transmision? bosch 0 281 011 136.EDC15VM+. with 29F800 flash.

[Doru Lucian]

I finally managed to start my Audi,with new EDC15vm+ sistem.
and I can say it was worth the effort.Ichange the driver 29F800 with used 29f400,in my ecu 0 281 011 136,and I put the file from 0 281 010 445,paired with immo and start fine ,everithing is ok,beter sound ,more power,and fast response at acceleration.Thanks to all members for help and advises