PDA

View Full Version : VW Passat 1.9 ECU Tuning



Pavle
7th March, 2013, 02:14 PM
Hi Friends,
My car is 1998 VW Passat 1.9 TDI 110 HP AFN,
My ECU is BOSCH 038 906 018 P, 0 281 001 720
I need tuning map and can i do that with MPPS Chiptuning v.12
Thanks

chucky69
7th March, 2013, 02:23 PM
nice first post

obnchip
7th March, 2013, 02:23 PM
Hi Friends,
My car is 1998 VW Passat 1.9 TDI 110 HP AFN,
My ECU is BOSCH 038 906 018 P, 0 281 001 720
I need tuning map and can i do that with MPPS Chiptuning v.12
Thanks

you need to solder and read 2*27c010 plcc eprom and than you can use 29f010 flash eprom...

camil
7th March, 2013, 02:28 PM
That xxxxxx018 ecu will not going to be OBD2 friendly :)

Pavle
7th March, 2013, 02:30 PM
That is the small chip inside my ECU?
I guess reading must be with some Special Tool

bobolin4o
7th March, 2013, 03:28 PM
Yes, by specialist!

bts
7th March, 2013, 05:02 PM
Hi Friends,
My car is 1998 VW Passat 1.9 TDI 110 HP AFN,
My ECU is BOSCH 038 906 018 P, 0 281 001 720
I need tuning map and can i do that with MPPS Chiptuning v.12
Thanks

Read the chips in the picture.

Example picture.

obnchip
7th March, 2013, 11:52 PM
Read the chips in the picture.

Example picture.

yes.what is eprom n.?

Pavle
11th March, 2013, 01:26 PM
First
BOSCH '98
1037356815
09.B333.1
HHH720

Second
BOSCH '98
1037356814
09.B323.1
LLL720

Thanks a lot

icezero2010
11th March, 2013, 01:28 PM
you must solder both if you need the original file i can send it for free

obnchip
11th March, 2013, 02:34 PM
I think i have done this version ill check it and send you the tuned file and than write it to 29f010 plcc...

Pavle
11th March, 2013, 03:01 PM
It's mean that I must take out or remove both Chips, and read their maps with some devices like CARPROG for example. If you already have the original file please send it to me.
I'm asking all of you my friends because I'm not sure and I don't know much about ECU Tuning and please some to explane to me the whole procedure for my case, to explane the steps, to be easy for me to follow your instructions. Thank you

camil
11th March, 2013, 10:08 PM
In either case you need to remove that chips from your ecu (desolder them).

Then you need to get a couple of 29F010 plcc flash chips.

Then program them with the tuned maps using a flash programmer.

Then fit them to the ecu the way you like, soldering directly, or soldering two plcc sockets and plug the flashes in them.

obnchip
11th March, 2013, 11:16 PM
pass in pm

picoche
26th April, 2017, 09:54 AM
hi possible passe obnchip VW passat 1.9TDI AFN 110HP 038906018P 0281001720 356815.mod.rar (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=181267&d=1363040159) (

pablo1971
19th July, 2017, 09:40 PM
can anyone tell me can this ecu be modded with out check sum.???

thunder2
27th April, 2018, 08:15 PM
Hi
Freiend can you send me Pass please

Regards

volvo lemian
8th July, 2018, 10:23 AM
Hi
Friend can you send me Pass please. Thanks a lot

SannyBrk
19th July, 2023, 01:20 AM
Hello all. My car is Audi A6 C5 with AFN engine and ECU 038906018DG and I'm aware that I have to do some soldering but I would like if someone could tell me is if I desolder original chips from board and solder back plcc32 socket and than put back those original chips in sockets will my car still work same like nothing happened until I get some tuned chips ?
Thx